Ride of the month nominations & voting.
User avatar
By teal_dx
#338593 How it works:
- This is a submission/nomination thread where members' vehicles should be posted.

- Members can post their own vehicles, or other members' vehicles.

- The owner of any car nominated must have at least 100+ posts and have been a Civic-EG.com member for at least 3 months.

- Post 4-5 pictures as well as modifications list.

- After 5 or so cars are submitted, the submission thread will then be locked and a new voting thread will be created with all the vehicles. Then you all get to choose the Ride of the Month!

- The winner will have their car featured on the main forum page for the month. Also they will have their car added to the Civic-EG.com Hall of Fame.

- You can win multiple times as you continue to modify your car, but not more than one time in the last 12 months. See the Hall of Fame for past winners.

Let's see some submissions for December Ride of the Month! :woot:
User avatar
By Apexracing
#338799 fago88

Engine
- B16a
- Self made CAI 3"
- BLOX 68mm TB
- ported s-tube
- ported JRSC M62 8.7 PSI
- RC 440 injectors
- Hondata IM gasket
- EK9 exhaust cam
- GSR intake cam
- Spoon spark plug wires
- Kamikazee 2,75" header
- 200 cells catalyst
- Yonaka Catback
- Mishimoto radiator
- Fidanza Flywheel
- Exedy clutch
- no ac, no ps, clean bay

Suspension / Brakes
- ES bushings
- D2 coilovers
- Rota Slipstream 7x16 offset 40
- ASR Subframe
- SRR rear swaybar
- Function7 LCAs
- ITR front swaybar
- SixPerformance Traction Bar
- EP3 300mm front break
- VTi 240mm rear break

Exteriour
- BYS style lip
- Spoon style
- EK side skirts
- Spoon wind shield

Interiour
- Blue DC5 recaros
- JDM ITR 96spec steering wheel
- JDM ITR shift knob

sure some more mods.... but don't remember thumb up

Image

Image

Image

Image

Image
User avatar
By teal_dx
#339001 We need a hatch in this vote:
Graham 1992 Sir
B18c
Mugen 4-1 Manifold
Custom made straight through under axle exhaust
Mugen dc2 intake
Spoon 70mm throttlebody
Chipped p30 ecu
Integra dc2 shift linkage, gearstick and knob

Cusco Zero2 coilovers
Front inner wing/ flitch braces
Cusco upper front and rear braces
Cusco brake stopper
ASR rear subframe brace
Integra dc2 front subframe and rack (no PAS)
Integra dc2 98 spec front and rear arbs
Fully polybushed
Racing Sparco ns11 wheels with michelin pilot tyres

Sparco ciruit drivers seat on Buddyclub low rail
Stripped interior bar doorcards, passenger seat and dash
No cage anymore


Image

Image

Image

Image