Ride of the month nominations & voting.
User avatar
By teal_dx
#336492 How it works:
- This is a submission/nomination thread where members' vehicles should be posted.

- Members can post their own vehicles, or other members' vehicles.

- The owner of any car nominated must have at least 100+ posts and have been a Civic-EG.com member for at least 3 months.

- Post 4-5 pictures as well as modifications list.

- After 5 or so cars are submitted, the submission thread will then be locked and a new voting thread will be created with all the vehicles. Then you all get to choose the Ride of the Month!

- The winner will have their car featured on the main forum page for the month. Also they will have their car added to the Civic-EG.com Hall of Fame.

- You can win multiple times as you continue to modify your car, but not more than one time in the last 12 months. See the Hall of Fame for past winners.

Let's see some submissions for October Ride of the Month! :woot:
User avatar
By *Miss_Honda*
#336659 Another try :lol:


Engine specs
B18C4 198.9 HP/205nm tuned on dyno
S9B LSD gear-box
Testpipe
Tanabe G power Medallion catback



Wheels
Volkracing NRS blue anodized lip 7J
Blue lugnuts
Front: Toyo R1R 225-45-R15
Back: Toyo R1R 205-50-R15

Brakes
EG2 front brakes with brembo max & ferodo ds2500


Exterior

VTI frontlip
BYS frontlip (not daily)
ABS spoon style mirrors
Polyester spoon style spoiler
OEM USDM taillights
Climair windowvisors


Interior
EDM EG6 cluster
Autometer oil temp
OEM grey armrest
OEM grey double din console
Broadway mirror
Bride seats
Bride Seatbelts
NRG Innovative Harness bar


Suspension
Full K-sport coilover system (extra hard version)
DC2 fuel tank
MB6 subframe
MB6 front swaybar 26mm
ITR rear swaybar 22mm
Lower strutbar
Benen tripod
Power steering rack (shorter steering)
PasswordJDM rear crossbar 4-point
Blue ASR brace
OEM EG6 LCA's





Image

Image

Image

Image

Image
By HeikDiesel
#336667 Beautiful ^ :o
By bks84
#336844 Drivetrain
85mmx89mm CRVTEC
Engine
    Supertech 12.5:1 pistons
    Eagle rods
    stock crank (LS)
    endyn ported b16 head (race)
    supertech springs, retainers and flat faced valves
    moroso 4qt pan
    rocket m24xx cams
    golden eagle cam gears
    twm 50mm individual throttles
    plm toda replica header
    fluidampr crank pulley/harmonic dampner
    skunk2 cam plug
    hondata coil on plug conversion using d17 coils and locash billet distributor cap
    Aeromotive stealth 340
    ID1000 Injectors
    hondata s300 v2
    Makes 230/160 tuned on E85.
Transmission/Clutch
    B16 trans w/OBX lsd
    Exedy clutch kit
4 port catch can setup
Custom fuel lines, w/inline filter and -6 braided lines from tank to rail, custom wiring harnesses, custom battery tray...

Interior
Sparco Sprint seat
PCI fixed position mounts
Stack 0-4000-10000 tach mounted in cluster
Stack Oil pressure, oil temp and water temp gauges
Innovate MTXL wideband
mostly stock...

Exterior
eBay foglights
spoon style mirrors
mostly stock...

Suspension/Wheels/Tires/Brakes
Suspension
    AMR coilovers 10k/8k
    JDM ITR front sway bar
    hardrace bushings through out
    hardrace toe arms
    hardrace camber arms
    skunk2 front UCA's
    ASR subframe brace
    ASR 24mm sway bar
Brakes
    wilwood master cylinder
    manual brake conversion
    Legend front brake calipers
    OE ITR pads
    Mini Cooper Rotors
    EP3 rear discs
    EP3 rear caliper bracket
    GSR calipers
    GSR OE pads
Steering
    manual rack swap
    Hardrace outer tie rods
    BuddyClub RCA's
    Quiafe QSR kit
Wheels/Tires
    15x6.5 RC Stark 1's
    dunlop dz101's


I dont have any professional pictures since Ive been dealing w/a few gremlins. But I Can get some if needed.

Image
Image
Image
Image
Image
User avatar
By Graham
#336854 Just noticed you had entered my eg - thanks! :thumb:

Ive not really got many pictures of the car but the current spec is:

1992 Honda Civic EG6 Sir
B18c
Mugen 4-1 Manifold
Custom made straight through under axle exhaust
Mugen dc2 intake
Spoon 70mm throttlebody
Chipped p30 ecu
Integra dc2 shift linkage, gearstick and knob

Cusco Zero2 coilovers
Front inner wing/ flitch braces
Cusco upper front and rear braces
Cusco brake stopper
ASR rear subframe brace
Integra dc2 front subframe and rack (no PAS)
Integra dc2 98 spec front and rear arbs
Fully polybushed
Racing Sparco ns11 wheels with michelin pilot tyres

Sparco ciruit drivers seat on Buddyclub low rail
Stripped interior bar doorcards, passenger seat and dash
No cage anymore :(