- Wed Mar 14, 2007 7:14 pm
#3086
http://civic-eg.com/viewtopic.php?t=92
There's an update on the electrical part...
Here's a couple teasers of the motor back in the bay
going back in...
IN! (finally)
It is only attached on the side mounts, still gotta bolt in the rear bracket & mount. Then it is just running the harness into the cabin, installing the radiator, fan & coolant lines. I need to shorten the fuel line and get a 180? AN fitting for where the stainless clutch line comes off the master cyl.
And that nasty valve cover is a spare, I'll have a nice one finished soon.
Next big part of this project is going to be the inside of the firewall. The brake proportioning valve, incoming brake lines, fuse box, external coil, ecu, and wires all need to be arranged & attached.