So Instead of paying an arm and a leg for them, I decided to make some.
This total project will cost around $10
I started by making some cardboard mockups. I don't know the exact dimensions
Then I went out to Home Depot and got a 1'x1' piece of 1/16" Galvanized Steel and some cheap black paint.
Trace the mockup onto the metal.
Cut them both out with large tin snips.
I went outside and bent them with a Vice grip.
Then paint them with 3-5 coats of the black paint.
Pretty darn good for only spending $10.
Drill some holes in the flat part of the winglets, and some holes in the bottom of your bumper and you're done! Hope this helps
My Build Thread: