Civic-EG.com Forum 3.3.1

- Wed May 20, 2009 2:55 am #117826 I need to get some kind of rubbing compound for my hood and bill. what do you guys suggest?

- Wed May 20, 2009 3:07 am #117828 peanut butter. lol..then again that's just like wax..I think you can wet sand the clear off it and reclear it, that is if it still has a clear.

- Wed May 20, 2009 3:17 am #117831 i am in the same conundrum. i have a C/F hood that has cracks in it. and i honestly dont know what to do.

|95 Civic DX|03 Silverado 2500hd|97 Escort LX

- Wed May 20, 2009 3:23 am #117832 just for the compound..I'd wet sand it first and reclear..if it just has a haze to it and you dont' wanna do wetsanding I'd use some strong wax and buff it..I still think wet sanding would be your best bet..

as for cracks..hmm..don't know what to say there

[teal_dx]

- Wed May 20, 2009 1:31 pm #117853 Check in the ever growing DIY thread... I think I remember Holly doing a good write up on this

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed May 20, 2009 8:50 pm #117929

Check in the ever growing DIY thread... I think I remember Holly doing a good write up on this

x2

she did a great write up and her bill came out great. wetsanding and reclear is the way to go

- Thu May 21, 2009 9:07 pm #118135 Yes I did

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718