- Sun Apr 12, 2015 11:19 am
#353109
Function and Form coilovers for an EG all you need to buy is the Type 1s and save yourself some money on a daily driven car there will be almost zero noticeable difference between the Type 1 and Type 2 except what they cost you. I also know a lot of people hate on Skunk2 but for a budget coilover setup these are a great option
http://www.jhpusa.com/store/pc/viewPrd.asp?idproduct=6452&idcategory=29 we have a set of these on my buddies EM1 which is slammed and they have been working great for 3 years of daily driving. Link to the car
http://courtesyflushsquad.com/cf/2014/09/12/erics-civic-si/p. I also remember your thread on the wheels you wanted to run. I would highly suggest looking into BCs (See below) with a custom spring rate you could fit those wheels flush with the body, with a stretced tire, and not worry about getting screwed up quarter panels or fenders. The ride will be stiff but it will look great going down the road.
This is my opinion on slamming the car the issue I copied this from my response in another thread...
We can spend all day discussing how bad slamming the car is for the majority of components in your vehicle. However if you want to slam your car do it with parts that are designed for that kind of abuse. Using coilovers designed like the racelands at an extreme drop will significantly shorten the lifespan of the shocks. The function and form design with an adjustable lower mount lets you keep suspension travel and adjust ride height but out of all of the ones designed that way (Megan, Godspeed, Ksport, D2, Skunk2, Tein, ... you get the idea) none of them will probably not go as low as you are wanting without removing perches and bumpstops defeats the whole purpose of these kinds of coilovers. So my advice is if you want the best of both worlds save up a couple hundred extra and look into BC Coilovers. They have the adjustable lower mount just like function and forms to control ride height without effecting shock travel or spring preload. They also offer an "Extreme Drop" option which comes with shorter shock bodies which will lower the car more and prevent bottoming them out when you are slammed. Also they allow you to opt for custom spring rates so you can get some stiff springs to keep the car from slamming into your tires on every reflector you go over. Good luck
BC coils should run you around $900 (extreme drop option is like $75 extra) shipped for the EG but if you shop around a bit some vendors will sell them cheaper. BC is pretty strict with the retail pricing and requires you to have the invoice from an authorized retailer for warranty. We ordered a fully custom set for my friends slammed Lexus SC300 and I was extremely impressed with everything about them. I've owned Buddy Club coilovers, K sport, Airtekk Air, D2, and Skunk2 coilovers and for the price the BCs are at the top of my list for quality and customer service for what you want to do. (FYI BC Coilovers are not the same as Buddy Club don't mix them up lol)
Also TruHart makes a quality product. I can't say anything about their coilovers (since I haven't recieved my set yet to replace the K sports) but their camber kits and toe kits are a quality product. I just installed everything they offer in an EM1 other than coilovers and their camber kit for my friends airred out TL. From how well their other components are made I would venture to say they are a safe bet.[/url]
Reviving Classic, Crafting Culture.
Classic Honda apparel, prints, and digital downloads.
Instagram:
https://instagram.com/enjoymotorsportsWebsite:
https://enjoymotorsports.com
I googled and there are many problems with clunking noises on the FF type 1 and 2's. They still ride well, just sound awful. I wouldn't buy them again.
