- Sun Apr 27, 2014 5:24 pm
Hello forum, this weekend i replaced my s9b lsd gearbox for a s80 lsd gearbox on my b16a2, also put a lightened flywheel in as well. When changing these i accidentally burst a hose and coolant leaked onto the connections of the speedo sensor that bolts onto the top of the gearbox. I didn't know this until i drove for several miles. The speedo didn't work to begin with then it starting coming and going. I thought leaving the connections to dry would eventually fix it but now it doesn't work at all. Another thing i noticed is that vtec seemed to only work when the speedo was working. Something to note is that i took the sensor for the speedo out of the s9b box and put it into the s80 so i don't know if this could be responsible for these problems. If anyone could give me advice or point me in the right direction it would be greatly appreciated.