ECU, Wiring, Sensors
User avatar
By Ajax1989
#226520 Ok i redid my timing cuz i replaced my dizzy(lifetime warrenty)
so i jumped the 2 wire jumper so you can time it
and im throwing code 15.. but my cel isnt on watso ever

code 15 is ignition output signal
wtf is that? wat does it mean??

help!
User avatar
By teal_dx
#226527 is your CEL light burned out? it should come on for a second when you start your car.


and if your CEL isn't on, how did you count the flashes to figure out you have a code 15 :?
User avatar
By Ajax1989
#226530 ok the cel isnt not on, when turn the key over it comes on for a sec and turns off like normal, but when you time the eg's you have to jump the 2 wires that you jump to show you your cel(stops the ecu from adv and ret the timing so you can set it correct), well when i jumped them to do my timing code 15 flashed
User avatar
By 92hatchie
#289747 how you fix this issue? im having a code 15.. my car cranks but doesnt start.