Civic-EG.com Forum 3.3.1

- Tue Jan 12, 2010 4:10 pm #167845 can some one give me a handand put up a link on how 2 wire up vtec on an eg coupe cant find a diy

[teal_dx]

- Tue Jan 12, 2010 4:49 pm #167859 Here you go:
http://www.civic-eg.com/viewtopic.php?t=10

the pin outs are in there

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Tue Jan 12, 2010 6:05 pm #167882 Mucho mucho thank u, ur the man. Now if u can get me a pick of the ecu harness showing me what pins r 4 vtec and what pins r 4 oil pressuer 2 make sure I get it 100000000% right

[teal_dx]

- Tue Jan 12, 2010 10:05 pm #167957
http://www.ff-squad.com/tech/wiring/wiring.92-95.jpg

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Jan 13, 2010 7:22 pm #168192 Thank u it helpd a lot one more thing dose the fact that I have a bad o2 offect my vtec not poping ? I'm wating on the o2 in the mail...... and all civic dx come wired 4 vtec I just have 2 locate the wire in the bay I have a 1993 honda civic dx coupe usdm ?

- Wed Jan 13, 2010 8:31 pm #168200 if you use an 92-95 ex engine harness.
can be had around here for ~ $100.

street machines > dyno queens
z6 turbo power FTW tuned on crome

- Wed Jan 13, 2010 8:43 pm #168205

if you use an 92-95 ex engine harness.
can be had around here for ~ $100.

yeah I know not willing 2 spend that amount 4 vtec lmaooo so its 4 sure that the 93 dx coupe harrnes comes wired into the bay 4 vtec both oil and vtec signels.? And my o2 senser is bad will that not let vtec pop ?