wiring in gauges

ECU, Wiring, Sensors
 Reply
User avatar

wiring in gauges

By d4rk13l4de
- Sat Aug 22, 2009 2:57 am #139217 im doing a 3 pillar pod with 3 gauges. my question is can i use any of the optional connecters to power them up?
User avatar

By teal_dx
- Sat Aug 22, 2009 4:00 am #139226 what do you mean by optional connectors? for the lights, just tap into your dash light 12v so they will work with them. :thumb: You might be able to tap in at the dimmer switch which wouldn't be too far from the pillar.
User avatar

By d4rk13l4de
- Sun Aug 23, 2009 12:14 am #139304 i ment the optional plug in at the fuse box
User avatar

By d4rk13l4de
- Mon Aug 24, 2009 12:05 am #139426 so i would want to use the center one, with the fuse in 16 because that is a switched 12v power source correct?
 Reply
Return to Chassis - Electrical