- Wed Oct 16, 2019 11:58 am
Well I've been out of town for nearly two weeks and I came back and picked up a few packages I had my neighbor hold for me.
Moroso road race baffled oil pan.
TracTuff water neck adapter. This moves the fill point to the highest part of the system and has a nice -16AN fitting which should allow me some more flexibility with my hose designs to work around the piping in the engine bay.
TracTuff intake manifold adapter. This lets me use the Skunk2 Ultra Race manifold.
And the first batch of wiring materials for the car showed up! Just placed the second order for the engine harness materials. But check out the motor sport 2awg cable. Dual walled with a contrast color so you can see if it has worn through easily. Made the first lead from the battery to the main breaker in the trunk. Went ahead and put mesh loom over it as well since I like how it looks and offers another layer of protection.
Another crimp tool added to my growing collection. Between this and my hydraulic crimp tool I can properly crimp almost any size battery terminal.
I've also got all the wiring measured and the pinouts figured out so I should be able to start putting together a solid wire harness when the parts start to come in. I do need to pick up a big piece of some kind of panel to lay out the diagram for the harness on. Think I'll check out Home Depot for a big sheet of peg board to use.