Springs, Struts, Swaybars, Bushings, Tower Braces & more
User avatar
By JDM_SLUT
#93223 Hi all! I'm new into working on my own car and was thinking about purchasing a ground control coil sleeve (since I cannot afford a full coilover set up). I'm planning on installing them to my 92 hatch dx. Currently my car have a tokico blue shocks and eibach springs but they are sitting too high. Im not planning on slamming my car too the ground but I just want it to be a little lower. I am gonna be using the tokico shocks with the ground control sleeve (i'm not sure if I am making sense) Please help.

Can someone please explain or maybe direct me to a DIY coilover sleeve install?(pic would be great) How hard is it and is there anything I need to consider before installing. Thanks again in advace.

p.s. I did search but did not find a DIY on a coilover sleeve. All help are much appreciated. Thanks! :(
By AIRPORTADAM
#93226 Well I have done sleeves on a 93ish accord and it was not hard at all, If you want my girlfriend (Heatherly) has a set of Megan sleeves and I am going to be installing them on her car as soon as I can or when it is a little warmer out I can just do a HOW TO, but if you have done lowering springs before then it will be not that big of deal. The biggest pain is to get them all adjusted correctly.
User avatar
By JDM_SLUT
#93364
AIRPORTADAM wrote:Well I have done sleeves on a 93ish accord and it was not hard at all, If you want my girlfriend (Heatherly) has a set of Megan sleeves and I am going to be installing them on her car as soon as I can or when it is a little warmer out I can just do a HOW TO, but if you have done lowering springs before then it will be not that big of deal. The biggest pain is to get them all adjusted correctly.


Yes please do a How To if you have a time. (with pics would be great!) I appreciate the help guys. Thanks alot!

ps. Please tell us how the megan coils ride is. Thanks!
Last edited by JDM_SLUT on Fri Jan 30, 2009 9:40 pm, edited 1 time in total.
User avatar
By JDM_SLUT
#93365
hatchin06 wrote:http://honda-tech.com/showthread.php?t=1078663

No pics but I hope it helps. take picks as you do it and make it a diy. we need one from a member if there isn't one yet.


Thanks bro. Yeah I saw this before but no pic like you mention.. Hopefully Air or someome here can do a DIY with a pic.
User avatar
By JDM_SLUT
#93423 good find hatchin06. Now all we need is the step by step install of the coilover sleeve in the hatch!.. Thanks alot . That is such a great illustration and kinda funny lol.