- Sat Sep 27, 2008 9:12 pm
#71692
A few of you may know i recently sold my pride and joy civic eg6 with the itr engine, i'd done everything to that car and really will miss it but i needed a new project, so here it is......
Its a JDM DC2 with 52k miles on it, it also has D2 coilovers fitted to it and a full cheap ass powerflow eggsause on it.
Its needs some love, nothing i'm not used too as i'm a fussy bugger
The guy who had it before me had it far too low, i raised it abit but it is proving a pain to raise as the threads are full of crap, the previous owner also pealed the type are graphics off as they were faded and somebody looks to have pulled the badge off and the window graphics are worn/dead (all new ones on order
)
The wheels also needed a recon as they were all stained and some had a small scuff or two on them.
The front bumper also needs painting, as somebody has done a poor attempt at repairing a scuff with tip-ex
and its a poor colour match.
The previous owner had also disconnected the front fog lights, so ive sorted that too
The boot mat was all manky and in poor condition, so Lee kindly donated one to the project .
Anyway heres the pics....
TLC that was needed...
Fogs sorted
New stickers oredered, painting black again tomorrow
Old boot mat was also in poor condition, new one thanks to lee
Watch this space for more updates and thanks for loooking!
Its a JDM DC2 with 52k miles on it, it also has D2 coilovers fitted to it and a full cheap ass powerflow eggsause on it.
Its needs some love, nothing i'm not used too as i'm a fussy bugger
The guy who had it before me had it far too low, i raised it abit but it is proving a pain to raise as the threads are full of crap, the previous owner also pealed the type are graphics off as they were faded and somebody looks to have pulled the badge off and the window graphics are worn/dead (all new ones on order
)
The wheels also needed a recon as they were all stained and some had a small scuff or two on them.
The front bumper also needs painting, as somebody has done a poor attempt at repairing a scuff with tip-ex
and its a poor colour match.
The previous owner had also disconnected the front fog lights, so ive sorted that too
The boot mat was all manky and in poor condition, so Lee kindly donated one to the project .
Anyway heres the pics....
TLC that was needed...
Fogs sorted
New stickers oredered, painting black again tomorrow
Old boot mat was also in poor condition, new one thanks to lee
Watch this space for more updates and thanks for loooking!
Last edited by b16a2vtiguy on Sat Mar 07, 2009 1:20 pm, edited 5 times in total.
94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress
Great start, i hope this turns out as good as the hatch, !! Cant wait !
good luck with the project
lol yeah the 96 spec wheels look better but the 98 spec just has so much more. bigger brakes, stiffer chassis, HID's from the factory, and other shit too.
