Always wanted a cheap and good big brake kit ?

Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
 Reply
User avatar

By DavidCivicSi
- Fri Feb 01, 2008 2:24 pm #40376 I have VTI Brakes with 262mm rotors, all i need is 282mm rotors ?! :?
User avatar

By Bouli
- Sat Feb 02, 2008 11:59 am #40532
DavidCivicSi wrote:I have VTI Brakes with 262mm rotors, all i need is 282mm rotors ?! :?



Yes and ITR brake calibers + brackets :thumb:
User avatar

By Greasedmonkey
- Sat Feb 02, 2008 4:29 pm #40545 Does anyone know if these will fit behind the stock 15in honda/acura wheels? or will I have to get something else? I dont want bigger than a 15.
User avatar

By Graham
- Sun Feb 03, 2008 12:40 am #40578 I know the fit behind the fat fives i used to have, so i should think so but it will be tight :lol:

Can definetaly get them under a lot of 15" wheels though without shaving the caliper or anything like that :thumb:

By dannyboyhonda
- Sat May 10, 2008 3:09 pm #54596 ive used 94 prelude 2.2vti caliper which are finished in matt black and pads with the mgzs 180 discs from ebc! the difference is amazing for the price. a good mod that pretty much anyone can do!!

By asianized
- Tue May 20, 2008 11:29 am #56071 question on the mc

does it matter that my car is auto & not 5 speed

also it has to be the 1 stamped 15/16 right?
User avatar

By Bouli
- Tue May 20, 2008 1:34 pm #56085
asianized wrote:question on the mc

does it matter that my car is auto & not 5 speed

also it has to be the 1 stamped 15/16 right?


automatic/manual doesm't mather...

15/16 is the right one, or you could take an 1" from a Teggy but they are more expensive

By asianized
- Wed May 21, 2008 12:27 am #56144 i've seen them on ebay for farely cheap but i can get 1 from a local junk yard

so it doesnt have to be from a type r then, a gsr one would do?


what about the rotors? what car r the rotors from?

sorry 4 the noob questions

By asianized
- Wed May 21, 2008 5:12 pm #56207
Graham wrote:You get the discs from an MG ZS 180


is that a civic or an integra?

:?

By asianized
- Wed May 21, 2008 8:46 pm #56239
Graham wrote:Its an MG..... :lol:


thats what i figured but wanted to make sure

was gonna check out www.buybrakes.com
for the rotors
User avatar

By LaMbErT*
- Wed May 21, 2008 9:45 pm #56249 Very tempted once i get my z6 head on!


Good on you for bringing this to attention! :thumb:
 Reply
Return to EG Chassis Brakes