- Fri Dec 04, 2015 5:21 pm
#357787
The bolts that go into the chassis should have no issues with the nut popping off in the body. Never seen it happen.
By HeikDiesel - Fri Dec 04, 2015 5:35 pm
- Fri Dec 04, 2015 5:35 pm
#357788
It's on a slider inside the frame. Unless you break that nut free from that adjuster, it won't fall out.
1992 Honda Civic SIR-S
By suspendedHatch - Sun Dec 06, 2015 5:01 am
- Sun Dec 06, 2015 5:01 am
#357796
The bolt gets so rusted that it will turn the welded nut and crack the welds off. Had this happen. Take a hole saw and drill an opening up from the bottom.
By beefystud - Thu Feb 04, 2016 12:54 am
- Thu Feb 04, 2016 12:54 am
#358360
so i figured out the answer and you have 2 choices
A. reuse the old rr comp arm i.e., don't unbolt it
B. stick a screw driver in the hole to make sure the nut stays in place when you unbolt the old rr comp arm
going to pick up si trailing arms this weekend and am probably going to go with option A
A. reuse the old rr comp arm i.e., don't unbolt it
B. stick a screw driver in the hole to make sure the nut stays in place when you unbolt the old rr comp arm
going to pick up si trailing arms this weekend and am probably going to go with option A