- Mon Jun 09, 2014 1:38 am
#346282
Started on the trunk tonight.
Took the wing off
You can see how my license plate garnish doesn't match.
Sanded with 100 Grit.
went back with 220 grit and then 400.
Bondo.
- Mon Jun 09, 2014 2:58 am
#346283
Sanded and primed
2nd coat
3rd coat
Final Coat
Gonna let it dry over-night and pick it up again in the morning.
2nd coat
3rd coat
Final Coat
Gonna let it dry over-night and pick it up again in the morning.
- Mon Jun 09, 2014 3:49 am
#346285
that looks good but you know that bondo is going to crack/fall out?
i tried filling my holes in my engine bay to shave it with bondo and it already started to crack. I can imagine with you shutting the trunk. You need to weld it then fiber glass then bondo.
i tried filling my holes in my engine bay to shave it with bondo and it already started to crack. I can imagine with you shutting the trunk. You need to weld it then fiber glass then bondo.
- Mon Jun 09, 2014 3:58 am
#346286
Since the holes are about the size of the eraser end of a pencil, I think it'll be ok. If It cracks, I can always go back and do it again.
- Mon Jun 09, 2014 11:47 am
#346295
Trunk is 95% finished! I painted the whole top of the lid.
Not bad for rattle cans. I still need to do a final sanding and clear coat.
1st coat
3rd or 4th coat.
The best part is the change of color isn't hardly noticeable!
(the paint surrounding it is faded)
Not bad for rattle cans. I still need to do a final sanding and clear coat.
1st coat
3rd or 4th coat.
The best part is the change of color isn't hardly noticeable!
(the paint surrounding it is faded)
- Mon Jun 09, 2014 8:43 pm
#346313
A package arrived today. What could it be?
New smoked amber corners are in!
Before
After
New smoked amber corners are in!
Before
After
- Fri Jun 13, 2014 3:03 am
#346422
Our local Pick-a-part is having a 50% off your whole purchase sale, so I'm probably gonna pick up some stock tail lights to keep in my back seat in case I have any hassle from the cops.
- Fri Jun 13, 2014 6:54 pm
#346429
Went to the junk yard today and immediately saw a clean, not even crashed EH9.
Looked inside and saw a JDM armrest, JDM white gauges, and a dash clock.
Popped the hood and saw a complete D16Z6 with short ram intake. Had some weird one-piece headlights. Also had DC headers and collector pipes.
Looked at the suspension and found some coilovers with no name that I could see. So, I picked up the clock and tail lights. If the coils and gauge cluster are still there when i get back from vacation, I'll pick them up.
Looked inside and saw a JDM armrest, JDM white gauges, and a dash clock.
Popped the hood and saw a complete D16Z6 with short ram intake. Had some weird one-piece headlights. Also had DC headers and collector pipes.
Looked at the suspension and found some coilovers with no name that I could see. So, I picked up the clock and tail lights. If the coils and gauge cluster are still there when i get back from vacation, I'll pick them up.
Last edited by Loaf31 on Fri Jul 17, 2015 8:08 pm, edited 1 time in total.
- Fri Jun 13, 2014 7:26 pm
#346430
I might have my brother go back tomorrow while I'm on the road and pick up that cluster.
- Sat Jun 14, 2014 11:22 am
#346441
can you take a pictures on how you did the wiring on the amber corners to light them up because i cant find a good tutorial thx
______________
D16Z6 Ej2 Coupe.
D16Z6 Ej2 Coupe.
- Sat Jun 14, 2014 7:32 pm
#346446
Unfortunately I'm out of town at the moment, so I'm not around my car. But the wiring should be the same as the stock corners. You just screw the existing harness and bulb into the amber corner light socket.
hope this helps!
hope this helps!
- Thu Jun 26, 2014 10:17 pm
#346779
Looking to trade my CTR front lip for a Mugen one. If anyone wants to trade, let me know! I might just sell mine and buy a new one though.