- Mon May 30, 2011 7:04 pm
#257408
Hello guys, This is my fist write up so be easy on me, if not the correct way, but here it goes, first i cut the center guts out of an eg steeering wheel like so[img][img]http://i493.photobucket.com/albums/rr291/barnyardcivic/PROJECT007.jpg[/img]
then cut the center out of this one[/img]
after the you have the center shaft out time to start on the 08 civic wheel, first completely disassemble on the back side its raised maybe 1/4 in to 1/2 so you will need to grind this downall the way flush across like so [img][img]http://i493.photobucket.com/albums/rr291/barnyardcivic/PROJECT029.jpg[/img]
I made a plate adapter out of a 1/4 piece of steel sorry no pic of that but heres one of it in then bolted up[/img]
and the finished product,
then cut the center out of this one[/img]
after the you have the center shaft out time to start on the 08 civic wheel, first completely disassemble on the back side its raised maybe 1/4 in to 1/2 so you will need to grind this downall the way flush across like so [img][img]http://i493.photobucket.com/albums/rr291/barnyardcivic/PROJECT029.jpg[/img]
I made a plate adapter out of a 1/4 piece of steel sorry no pic of that but heres one of it in then bolted up[/img]
and the finished product,