- Sun May 22, 2011 7:55 pm
#256348
Ok so today I got my main relay kill switch installed, but now my fuel pump won't prime. I'm not sure what went wrong. I only get one click on the main relay( key on1)
My main relay has two black ground wires, I joined those two together and spliced it with a 16 gauge wire and pinned it to my switch (20amps) and grounded the other pin. I can toggle it on and off and the check engine light also goes off and on.
When I start the engine it just cranks obviously. I'm pooped I don't kno where to look or what I did wrong. And everything is tucked away, great I gotta rip it all out again I should of tested it first.
Any help would be great
My main relay has two black ground wires, I joined those two together and spliced it with a 16 gauge wire and pinned it to my switch (20amps) and grounded the other pin. I can toggle it on and off and the check engine light also goes off and on.
When I start the engine it just cranks obviously. I'm pooped I don't kno where to look or what I did wrong. And everything is tucked away, great I gotta rip it all out again I should of tested it first.
Any help would be great