Civic-EG.com Forum 3.3.1

- Sun Dec 05, 2010 12:37 pm #226122 can the above model front and rear seats fit nicely on our civic?

[chrono404]

- Mon Dec 06, 2010 2:56 am #226222 They will not bolt into place. However it more likely then not that you can weld mounts and be able to get it to fit into an EG. The Rear seats might be able to fit into a Sedan. Probally to big for a Coupe/Hatch.

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Tue Dec 07, 2010 2:16 pm #226479

They will not bolt into place. However it more likely then not that you can weld mounts and be able to get it to fit into an EG. The Rear seats might be able to fit into a Sedan. Probally to big for a Coupe/Hatch.

Any expert can confirm or has tried it on sedan??
I am told that the front seats are direct bolts.....

[chrono404]

- Wed Dec 08, 2010 6:41 am #226646 TSX's are the same width as Integras, which are the same width as EG and EK's so The rear seats should move across, However I'm not sure where the seams will be.

If you want easy to bolt in seat upgrades the EK Sedan Rear Seats(and Acura EL as well) rear seats are a direct swap out from what I have read.

I doubt all 4 holes from the TSX Seats will bolt right in, Especally since the RSX front seats dont do the same. You need to make mounts for them

2017 Chevy BoltEV DD |2001 Honda CRV SE

- Wed Dec 08, 2010 8:08 am #226661

TSX's are the same width as Integras, which are the same width as EG and EK's so The rear seats should move across, However I'm not sure where the seams will be.

If you want easy to bolt in seat upgrades the EK Sedan Rear Seats(and Acura EL as well) rear seats are a direct swap out from what I have read.

I doubt all 4 holes from the TSX Seats will bolt right in, Especally since the RSX front seats dont do the same. You need to make mounts for them

correct i bought RSX front seats and thought they would fit my EG but only the 2 bolts in the back bolted on the front you would have to cut and weld

http://civic-eg.com/viewtopic.php?t=17296
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828

#3 CivicEG.com Ferio Squad

- Mon Dec 13, 2010 1:23 pm #227619

TSX's are the same width as Integras, which are the same width as EG and EK's so The rear seats should move across, However I'm not sure where the seams will be.

If you want easy to bolt in seat upgrades the EK Sedan Rear Seats(and Acura EL as well) rear seats are a direct swap out from what I have read.

I doubt all 4 holes from the TSX Seats will bolt right in, Especally since the RSX front seats dont do the same. You need to make mounts for them

correct i bought RSX front seats and thought they would fit my EG but only the 2 bolts in the back bolted on the front you would have to cut and weld

Any ideas rear seats can fit?
Can post picture online?

- Thu Dec 30, 2010 10:11 am #230496

TSX's are the same width as Integras, which are the same width as EG and EK's so The rear seats should move across, However I'm not sure where the seams will be.

If you want easy to bolt in seat upgrades the EK Sedan Rear Seats(and Acura EL as well) rear seats are a direct swap out from what I have read.

I doubt all 4 holes from the TSX Seats will bolt right in, Especally since the RSX front seats dont do the same. You need to make mounts for them

Bought EK rear seat and they are direct fit.
Which year of the Acura EL can fit also?

- Thu Jul 05, 2012 4:39 am #310151 Still awaitng for expert's advice.


Need to change the interior......