Post YOUR Hatchback here
By deschlong
#210627 ^^ Coo. Then yeah sounds like a good move on your part. Feel like parting with a few bits from the old CX cluster?

I'm after the little plastic piece with the right turn indicator/BRAKE/high beam/shift light (top right in your pic) ... if you're not using the cluster anymore then I would like to buy that little piece off you. :)

EDIT: There should also be a little plastic tabs behind the indicator.... would like them too. :)

Tx - let me know!

Image
User avatar
By Classiccarsrule85
#211926 So i started the night before by jacking my car up completely and really due to the heat and my lazyness i didnt start working on the car till around 4pm est kinda was dreading the big project of replaceing all the brake lines but thankfully i didnt have to not yet but i will soon anyhow i popped all the wheels off put some fluid in it and bam found my leak went to autozone bought a straight piece and fixed it for under 20$ includeing two new bleader screws as the ones on the rear wherent in great condition damn NYS rust.....

anyhow its fixed i drove it a bit forgot i put the crx si rims i bought in the back of the car went around a turn and lol it was interesting but none the less im so happy!!!here be the pics

Image

Image

Image

Image

Image

due to the condition of the lines im going to do more research and replace all when i get the car parts i need....

Image

Image

This car was taken for at least looks like newer drums and everything else is in decent overall condition im loving the stock stuff as i know some idiot teen never got their hands on it lol....

So small the CX rotors
Image

Image

Image

Image

BAM!!! Leak fiound
Image

Image

Image

Image

Image

And finally fixed

Image

Image

So happy and its a nice update anyhow gotta get to bed now wake up at 4am for work but heck i dont know if i can sleep im excited to be driving my car again my little hatch cant wait to put a down payment on a nice little upgrade so just wait for that update its going to be a duzy....
User avatar
By Classiccarsrule85
#213076 So today i decided to change out my headliner and get some of the blue interior in the red hatch(updates on that as well http://civic-eg.com/viewtopic.php?t=6961&start=105)

anyhow so i was debateing for a bit if i wanted to keep the headliner in my white hatch or go all out and swap the complete interior as when i got looking at it was a different color than the other one more of a light light blue so i decided to go ahead and swap it out well partially lol havent put anything back into the white hatch interior wise as im still wiring things up btu took some new pics of it completely striped.....except for an e-brake, d.side seat and guage cluster.....

Image

Image


My puppy helped me lol

Image

Image

And here is a pic of the two headliners together even tho the one for my black interior is rather dirty its still a different shad so yea swapping that out.....debating on the map light as well.....

well until next time we will see what happens......
By deschlong
#213092 +1 for the maplight! :wink:

I've found it really handy - but I'm considering replacing mine with the dual-switch Integra light instead of the OEM one that annoyingly lights both sides... really distracting for the driver if just the passenger needs light.
User avatar
By chrono404
#213100 Project is coming along nicely.

The CX stock exhaust is so small :lol:
By Adrian91
#214818 good to see its coming along
User avatar
By Classiccarsrule85
#214873 yes its comming along and heres a teaser shot of something i just got in the mail.....May tease you more until i get the rest or most of it at least lol....cannot wait woot!!
Image

and an update on the interior swap no more blue it is officially blue no more last parts of the swap where the door panels so now i just have to do some wiring and done....

and i dont know if ill use these or sell them cheap and go brand new as i dont know if i can get the washers....but ill do some research.....

Image

ohhh and bought something off my friends civic si that was wrecked for my cx i shall update that as well shortly lol... so many updates im just waiting to do them all in one big shot and tease you guys a bit....
User avatar
By Greasedmonkey
#214890 you should be able to order the washer from ARP or a dealer.
User avatar
By berg89
#214893 I like the project. And also all the pics. :thumb:
User avatar
By JDM FERIO MAN
#214895 white hatch red bumper looks like my hatch lol but I have no rust lol looks good
User avatar
By JDMBOY
#214908 good job of restoration

i have a 93 cx but my car has more problems than yours, and also worked on a restoration
User avatar
By Classiccarsrule85
#217378 So my buddy came over complaining of what he thought was his axel so he brought it over and low n behold the lugs were loose.....so i had time to kill so i decided to upgrade my ride a bit before winter comes and it gets put up for the winter while i work on getting it turboed :) ill have updates for that shortly...but anyhow here are pictures of the new rims and my 4x4 status lol even tho its higher up it still grips like hell and looks sweet anyhow....

Image

Image

Image

Image

Image

Rota circuit 8's that i picked up from my friend and yea i was bored so for the two weeks before winter i will be driveing these
User avatar
By Classiccarsrule85
#218962 So another small update as winter approaches im trying to get rid of the 4dr hoping to maybe get another hatch but if not id like a truck so i can haul stuff etc....but we will see anyhow this is about my hatch not my 4dr so here we go with a small update pics to come shortly....

I decided to use the motor cycle muffler just to see how it sounds and well its sounding pretty sweet and looks quite nice and i can tell you is about 10lbs lighter then my oem muffler damn that thing is heavy soon to be changeing the whole exhaust dont know if its today tho got some things to do but anyhow pics to be up soon....
User avatar
By Flatland_EG
#219108
Classiccarsrule85 wrote:I decided to use the motor cycle muffler just to see how it sounds and well its sounding pretty sweet and looks quite nice and i can tell you is about 10lbs lighter then my oem muffler damn that thing is heavy soon to be changeing the whole exhaust dont know if its today tho got some things to do but anyhow pics to be up soon....



HA, I knew I wasn't the only one with this idea. I've got a stainless muffler from a Honda CBR 600, found it in a dumpster in excellent shape, that I want to put on my mine. I like it because it's low profile and it's a Honda OEM part. :D Should sound interesting.

You should post a small video of it on here, I wouldn't mind knowing what it sounds like.
User avatar
By Classiccarsrule85
#219122 So the pictures i promised....and if i can get video ill try my best but i really dont have anything that takes video....

Image

Image

Image

Image

Image

Image

Image

mainly did a quick job on it there are some faults in the hanger. but besides that i feel that it will be a nice upgrade in the end....but there are other thing of wish i have yet to test on it and that will involve time to do the testing....but yea other then the small leak around the flange as the cx piping dosent like the size of my ex flange.....