Civic-EG.com Forum 3.3.1

- Sun May 26, 2013 9:10 am #332147 Best place to ask I guess. Not sure why I can't find eanything with Google, Could be writing in the wrong thing.

What mods are needed to fit a hatch exhaust to a sedan/coupe?

Has anyone done it and how did they go about it?

- Sun May 26, 2013 9:24 am #332148 unfortunately, the hatch exhaust is a bit shorter than the sedan/coupe. where the hatch goes more or less in a straight line to the downpipe, the sedan/coupe makes two almost 90 deg turns before it gets to the downpipe. only way to make a reliable exhaust, good enough to be worth the time spent on it, would be to bend and cut and weld new pipe, and at that point, its easier to just go buy one off a sedan/coupe.

i feel your pain tho! i went thru the same problems and couldnt find much info for it

- Sun May 26, 2013 4:50 pm #332152 That's way way wrong. I have a sedan exhaust on my hatch right now. The only differenct is in the muffler section. The header, downpipe and mid section are bolt up with no problem. The muffler stuck out about 5 inches past the bumper. I took out a section and rewelded it and it fit perfect.

- Mon May 27, 2013 3:49 am #332163 ^ that

92-00 mid pipes are all interchangeable. It's the mufflers that differ.

2007 Honda Civic Si