B16, B18, B20
By bks84
#340920 Id just clean the screen in the gasket and see if that helps... If the screen is dirty, then I'd suspect it to be a wiring problem... either at the ECU or somewhere in the harness/connectors.
User avatar
By cleanb18eg
#340929
bks84 wrote:Id just clean the screen in the gasket and see if that helps... If the screen is dirty, then I'd suspect it to be a wiring problem... either at the ECU or somewhere in the harness/connectors.


I replaced the screen and checked the wiring. I found a bad solder joint so I re-soldered it and still acts the same.