- Sat Aug 04, 2012 6:06 pm
#312809
i have just put a b16a2 into my eg4..
my setup:
chipped p28> 0bd1 sir interior harness>obd1 vti engine harness
i have modified the obd1 harness
*swapped injectors for obd2
*rewired dizzy and alternator for obd2
*used the eg4 original interior harness for the map sensor wire and plug and spliced it into the shock plugs of the sir interior harness
*extended the iat sensor
wen i turn the key i cant hear the fuel pump prime?...and when i turn the key fully i get nothing but a little click in the engine bay somewhere
All the electrics seem to work... lights,wipers etc?
as for cell codes the engine light comes on once for about 4 seconds...goes off... and then comes back on, and stays on?!
im not sure what this means? can anybody help?
thanks!
my setup:
chipped p28> 0bd1 sir interior harness>obd1 vti engine harness
i have modified the obd1 harness
*swapped injectors for obd2
*rewired dizzy and alternator for obd2
*used the eg4 original interior harness for the map sensor wire and plug and spliced it into the shock plugs of the sir interior harness
*extended the iat sensor
wen i turn the key i cant hear the fuel pump prime?...and when i turn the key fully i get nothing but a little click in the engine bay somewhere
All the electrics seem to work... lights,wipers etc?
as for cell codes the engine light comes on once for about 4 seconds...goes off... and then comes back on, and stays on?!
im not sure what this means? can anybody help?
thanks!
Follow my Build thread!! - http://civic-eg.com/viewtopic.php?t=23404