- Sun Mar 04, 2012 2:46 am
#296944
ok so im sure this has been asked before but ive been searching pretty hard and cant find the answers i need. heres what i have. 93 civic dx non vtec. swapped in a jdm b16 SIR motor. have the p30 ecu that mates to it. here is my trouble. i have no vtec plug or wiring also the knock sensor above the oil filter has two wires sticking out but dont know where to put them. everything else is plug and play. the motor runs smooth other than lack of vtec power. ive seen diagrams but dont know what plug is called what or which one goes where. thank you guys ahead of time for any help you can give me.
the jdm motors didnt come with a pressure switch for the vtec. also if you are using the non vtec harness then you will need to wire up vtec or get a harness for a vtec motor like the z6 harness or a delso dohc harness.
if you need pictures i can post them
your car is your story, dont let someone else write the book.
91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348
91 s10 (sold)
92 civic si with jdm b16a (Sold) http://civic-eg.com/viewtopic.php?t=13460
99 civic lx (current) viewtopic.php?f=63&t=30348