type r cams

B16, B18, B20
 Reply
User avatar

type r cams

By Josiah
- Thu Oct 30, 2008 2:40 pm #76594 will type r cams do anything for me in a gsr motor? any at all?
User avatar

By Greasedmonkey
- Thu Oct 30, 2008 4:09 pm #76605 yes they would.
User avatar

By Josiah
- Thu Oct 30, 2008 7:42 pm #76639 well what would be the dif, if i just threw those in with nothing else? 5hp?10hp? im going turbo so im sure they will help. so what would i get out of them. how much should i sell the gsr cams for?

By sdots
- Thu Oct 30, 2008 8:59 pm #76652 if you go turbo get Crower cams. and depends which type r cams. B18c has a less aggressive VTEC lobe where as the cams found in B16B are noticeably different.
User avatar

By Josiah
- Fri Oct 31, 2008 4:46 pm #76725 i couldnt use the crower stage 2 cams could i with a stock bottom end besides eagle rods?
User avatar

By Greasedmonkey
- Sat Nov 01, 2008 2:22 am #76771 you you can. you just need need the valve springs that match those cams.

By sdots
- Sat Nov 01, 2008 10:57 pm #76854 ^^ listen to him. if your going boost, it's a good time to spend money on the head and making it stronger.
User avatar

By Josiah
- Mon Nov 03, 2008 8:16 pm #77047 ite
User avatar

By Blk95coupe
- Fri Nov 07, 2008 3:56 pm #77648 No one said this lol but im guessing your putting this in something thats not a GSR?

You will gain something not very much the only thing you will notice big time is that your RPM Range will hold longer and not fall off so fast :thumb:
User avatar

By Josiah
- Mon Nov 10, 2008 2:18 pm #78080 it is gsr. i wanted to leave the head alone besides a valve job. but eagle rods and wiseco pistons and 10lbs of boost. i definetly should beef up the head? i dont want to rev 8500-9k though. thats how you break stuff
User avatar

By Greasedmonkey
- Mon Nov 10, 2008 5:11 pm #78108 you dont really need to do anything to the head. the ITR cams will hurt you more than help you when boost is involved.
 Reply
Return to B Series