- Sun Sep 25, 2011 6:45 am
#274341
eg hatch with f22 motor with eg stock radiator... what radiator hose's do i use can someone help plz.........
- Mon Oct 17, 2011 11:16 pm
#278110
any one
- Sat Nov 05, 2011 3:58 pm
#280261
I used one the rad out of a prelude an those hoses
- Mon Dec 26, 2011 6:15 am
#287060
I'm using an eg radiator
- Thu Dec 29, 2011 5:00 am
#287456
chances are, if you dont have to make your own, youll have to at least modify some to fit.
95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
- Thu Dec 29, 2011 5:14 am
#287457
That is correct. I used the stock hose, But it was a bit long and was kinking the hose, Therefore I cut about 3 inches off of it, and it fit perfectly.
TrailerTrash wrote:chances are, if you dont have to make your own, youll have to at least modify some to fit.
That is correct. I used the stock hose, But it was a bit long and was kinking the hose, Therefore I cut about 3 inches off of it, and it fit perfectly.
1992 Civic Hatch F2D Granada Black
|Garrett 60trim | Large Treadstone FMIC | 880cc Injectors | HKS SSQV BOV | Tial Wastegate | ARP Main Studs and Bolts | E85 on 15PSI |
|Garrett 60trim | Large Treadstone FMIC | 880cc Injectors | HKS SSQV BOV | Tial Wastegate | ARP Main Studs and Bolts | E85 on 15PSI |
- Mon Mar 12, 2012 4:26 pm
#297925
X2!
F2DEG wrote:I used the original F22 Hose, But I had to cut it just a little bit.
X2!
Check out my SLOW build thread and let me know what you think! http://civic-eg.com/viewtopic.php?p=296629#296629