- Sun Jun 10, 2012 7:52 pm
#307881
CEL off now !!! O2 Error Fixed
E3 Diamond Fire Plugs (can feel the power difference)
I hate Plastic chrome so black out till i get my Type R Parts
New Aftermarket Panels
Both Fenders, Hood, F-Bumper, Bumper Stays for the first order.
- Mon Jun 18, 2012 8:48 pm
#308638
[/img]
- Mon Jun 25, 2012 7:50 pm
#309348
Today i got my Plates and sticker so everything is happy go lucky!!
- Sun Jul 08, 2012 7:13 pm
#310349
[QUOTE=ChristopherJason;828346]My buddys wheel compared to my stocks
New Deck
Went for a trip Canada day
Today i borrowed a Polisher and some compound from work...
Polished Everything but the bumpers and roof cause there ruined, then new finished the everything but the roof and bumpers. she looks amazing now. next up some small parts to make it look better and run better.
Cant wait to get coil overs and be closer to the ground. being up high like this makes me feel like an offroader[/QUOTE]
New Deck
Went for a trip Canada day
Today i borrowed a Polisher and some compound from work...
Polished Everything but the bumpers and roof cause there ruined, then new finished the everything but the roof and bumpers. she looks amazing now. next up some small parts to make it look better and run better.
Cant wait to get coil overs and be closer to the ground. being up high like this makes me feel like an offroader[/QUOTE]
- Mon Jul 09, 2012 3:12 am
#310368
nice
have i seen your car on stancworks aswell?
have i seen your car on stancworks aswell?
95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
- Tue Jul 10, 2012 11:36 pm
#310563
@ trailer Trash Yupp im on there too
and yes i need coils or at least lowering springs that should come soon, im getting a full front suspension from a Hatch SI so im gunna re do it and paint it all up and fit it on here, then im looking out for a GSR teg rear so i can do the Disk swap.
and yes i need coils or at least lowering springs that should come soon, im getting a full front suspension from a Hatch SI so im gunna re do it and paint it all up and fit it on here, then im looking out for a GSR teg rear so i can do the Disk swap.
- Wed Jul 11, 2012 3:27 am
#310576
you looking to get a nice set of wheels? i may have missed that part in your posts
you looking to get a nice set of wheels? i may have missed that part in your posts
95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little
- Wed Jul 11, 2012 3:45 am
#310581
yeah im gunna be looking at wheels maybe the end of aug or mid sept might buy around jan/dec depending on what i can afford and what work/paint needs to be done to them, but deff still gonna look until then.
But atm im more looking for a teggy GSR rear end so i can do the disk swap.
But atm im more looking for a teggy GSR rear end so i can do the disk swap.
- Wed Jul 11, 2012 3:26 pm
#310630
you're going to want larger front disks if you go with rear disks.
ej6 have smaller front disks (9.5") than ej8 (10.3").
i'm going with a set from an 00 si, front and rear.
ej6 have smaller front disks (9.5") than ej8 (10.3").
i'm going with a set from an 00 si, front and rear.
street machines > dyno queens
z6 turbo power FTW tuned on crome
z6 turbo power FTW tuned on crome
- Wed Jul 18, 2012 8:57 pm
#311432
So my Door regulators and motor came in yesterday, so now i have 4 working doors. but only 2 have fully working toggles.
my Passenger Front and Rear are fucked, front one only goes up, back one only goes down, so now on to buying some switches.
if anyone has 2 then can sell me that works it be greatly appreciated cause Honda and keystone want 40$ a piece. so that's BS atm.
Ooh I painted my Steelies Satin Black because they looked like shit before.
other then that im waiting to get paid so i can do, Tie rods, and ball joints.
im trying to sell a set of tenzo shu 4's
so if your looking for a set of wheels to re do. or just rock for laughs.
http://brantford.kijiji.ca/c-cars-vehic ... Z396461115
willing to drop down to 160 for them cause i just need them gone.[/img]
my Passenger Front and Rear are fucked, front one only goes up, back one only goes down, so now on to buying some switches.
if anyone has 2 then can sell me that works it be greatly appreciated cause Honda and keystone want 40$ a piece. so that's BS atm.
Ooh I painted my Steelies Satin Black because they looked like shit before.
other then that im waiting to get paid so i can do, Tie rods, and ball joints.
im trying to sell a set of tenzo shu 4's
so if your looking for a set of wheels to re do. or just rock for laughs.
http://brantford.kijiji.ca/c-cars-vehic ... Z396461115
willing to drop down to 160 for them cause i just need them gone.[/img]
- Tue Jul 31, 2012 1:04 am
#312331
so i got an intake from AEM !!
ooooo some parts
Shit Stockk
SOOOO SHINNY
Stock Gone
All installed
Good Old Honda Manifolds
[/url]
ooooo some parts
Shit Stockk
SOOOO SHINNY
Stock Gone
All installed
Good Old Honda Manifolds
[/url]
Last edited by ChristopherJason on Wed Aug 01, 2012 10:49 am, edited 1 time in total.
- Wed Aug 15, 2012 9:38 pm
#313576
So after the intake i started getting some over heating issue well this little whore was the problem
Ripped the front off to install a new Hood Release cable and to look for more rust
Couple Random Shots from work
Rocking my Buddys Tenzo Shu 4's cause i have no tires for my steelies atm so i need something lol
Got this
Old Drumss
Had to go to crappy tire cause a brake line split
Tonight i might be ordering up a Master Energy Suspension kit, i have 2 back bushing that are right shot so well im down there i might as well replace them all. and get some better driveablity out of the car
Ripped the front off to install a new Hood Release cable and to look for more rust
Couple Random Shots from work
Rocking my Buddys Tenzo Shu 4's cause i have no tires for my steelies atm so i need something lol
Got this
Old Drumss
Had to go to crappy tire cause a brake line split
Tonight i might be ordering up a Master Energy Suspension kit, i have 2 back bushing that are right shot so well im down there i might as well replace them all. and get some better driveablity out of the car
- Page 2 of 4
- 1
- ,
- 2
- ,
- 3
- ,
- 4