- Thu Nov 27, 2014 5:54 am
#350104
Creating this thread just to help me keep track of my restoration/build. Feel free to comment and criticize. I'll answer any questions I can. I will be updating as I work on the car.
Plans are just to keep everything clean and a few minor mods. Updates will happen when I get time to do any repairs or work. I can only work on it when I have free time so it may be a slow process. Anyway, ENJOY!
-11/22/14-
Purchased my 1993 Civic EX sedan. Drove 4 hrs round trip to pick it up. Body is in decent shape. No major dents but had some prior repairs done on quarter panel and has aftermarket front bumper (unpainted). Minor interior parts needed as well but overall, in good shape.
(night the car purchased)
-11/23/14-
Purchased prelude HP4 center console. Will modify to fit when the time comes.
-11/24/14-
Brought my car to work to put it on the lift and see how everything is. A few issues i found.
1) oil leak coming from oil pan and vtec solenoid. (purchased 2 gaskets from honda. not yet installed)
2) driver ft window does not roll up correctly. I removed trim panel to find a DX door with custom drill holes to hold the regulator so i ordered a used EX door. Now waiting for arrival.
3) braking caused a jerking motion in the car so i replaced the rotors and pads.
-11/25/-14-
STARTED BODY REPAIRS!
before (not me in pictures):
current:
before:
current:
Plans are just to keep everything clean and a few minor mods. Updates will happen when I get time to do any repairs or work. I can only work on it when I have free time so it may be a slow process. Anyway, ENJOY!
-11/22/14-
Purchased my 1993 Civic EX sedan. Drove 4 hrs round trip to pick it up. Body is in decent shape. No major dents but had some prior repairs done on quarter panel and has aftermarket front bumper (unpainted). Minor interior parts needed as well but overall, in good shape.
(night the car purchased)
-11/23/14-
Purchased prelude HP4 center console. Will modify to fit when the time comes.
-11/24/14-
Brought my car to work to put it on the lift and see how everything is. A few issues i found.
1) oil leak coming from oil pan and vtec solenoid. (purchased 2 gaskets from honda. not yet installed)
2) driver ft window does not roll up correctly. I removed trim panel to find a DX door with custom drill holes to hold the regulator so i ordered a used EX door. Now waiting for arrival.
3) braking caused a jerking motion in the car so i replaced the rotors and pads.
-11/25/-14-
STARTED BODY REPAIRS!
before (not me in pictures):
current:
before:
current: