EG9 B18/A2

Post YOUR Sedan here
 Reply

EG9 B18/A2

By aditas
- Sat Mar 17, 2012 7:42 am #298557 Hi guys,

I ve been here for a while, but never got time to show my "ride"...

Its a EG9 civic with b16a2.
I got the car without the engine, so I sold my old (newer) Civic ep2, to buy an engine...

Here is the new spec.:

B18C4 block
B16B (CTR) pistons
B16A2 head with ITR camshaft
B16A2 intake manifold (ported) with ITR TB
for the moment I have a DIY CAI... but will buy or make one from stainless steel
ECU - P30 with tunerc (ECTUNE) electr.
and the gearbox is y21 with LSD

Image

By aditas
- Sat Mar 17, 2012 7:47 am #298558 Image
Image

making it ready for paint

Image
Image
Image

CRX seats... with alcantara look and yellw stiches

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

By aditas
- Sat Mar 17, 2012 7:54 am #298559 Image

engine arrived... :)

Image
Image
Image
Image

Image
Image
Image
Image
Image

By bigpunn421
- Sat Mar 17, 2012 5:11 pm #298590 is the rear seat form a crx? and what did you do to bolt them up?


build loks sweet and nice car

By aditas
- Sun Mar 18, 2012 10:54 am #298672 No the rear seats are original from EG9... Only the front seats are taken from CRX 2.gen.... Since the bolts on the floor of the car are 43cm apart, I made a extension and welded it on the seat... On crx seats bolts are 38cm apart. Just 5cm difference.

Thanks :wink:

By aditas
- Mon Mar 19, 2012 7:12 am #298798
familyEGuy23 wrote:Nice sedan :thumb: you reupholstered the crx seats yourself?


I didn`t by myself... I took it to a upholstering shop. They took the original off, and a new one was sutured to the seats. They did so with the backseats too. :) :)

By aditas
- Mon Mar 19, 2012 12:04 pm #298804
familyEGuy23 wrote:Cool about how much did it cost if you don't mind me asking :)


No I dont mind.. it costed 320 BAM ( approx. 160€) for the whole set.
I did the design first.. (picked where seams were etc). :D
User avatar

By 1ACarlos
- Tue Mar 20, 2012 5:01 pm #299008 Nice

By aditas
- Tue Mar 20, 2012 6:34 pm #299032 Thanks guys...

Currently I have ITR exhaust manifold (header) , but by the end of the week I am getting Hytech header and a SOLE catback exhaust.
I am also going on dyno this week, for a remap. :thumb:

By aditas
- Wed Mar 21, 2012 1:17 pm #299119 Image
Image
User avatar

By greggarcia
- Thu Mar 22, 2012 2:47 pm #299342 excelent work... i really love this motor and black cars like this

By aditas
- Thu Mar 22, 2012 4:38 pm #299370 thx mate... well the idea was to look like a family car, be all black( with yellow and gold details), but be mean under the hood :D
 Reply
Return to Your Ride - Sedan