Post YOUR Sedan here
By slipstream622
#219464 from then .....bone stock....

traded my vti shoes to 17's then down to 15's....

for more detailed pics....
http://www.facebook.com/Slipstream622?v ... 1621331780

Image

Image

Image

till now....

Image
Image

diy red needle
diy replaced all panel and climate control lights
momo steering
jdm cupholder
jdm long armrest
subaru seats
sparco seatbelts

update....

2 rows full alum rad....
4-2-1 stainless headers ...
newly painted shoes and decals...

Image
Image
Image
Image
Image
Image

more to come...
Last edited by slipstream622 on Tue Apr 10, 2012 12:55 pm, edited 3 times in total.
By Clarkypoo
#219465 How did you bolt down those safety harnesses?
By slipstream622
#219471
Clarkypoo wrote:How did you bolt down those safety harnesses?


to the seat bolts sir....had it crossed over before underneath but was not confident with it...also tried bolting it on the rear seatbelt bolts but wifey didn't like it...
User avatar
By bumpin
#219472 luvin the radiator and the headers man....hope you can give me some terms on those shit :lol:
By slipstream622
#219475 hahaha....thanks papa bumpin....still having second thoughts on shipping those rads again...it's too bulky...i can only accomodate 4pcs in 1 box....the headers...let's talk about it...still have some backlog to my previous orders....once it's clear we can set your special arrangement....fyi 10 sets coming in this dec....

will take a pictorial of alex once i get my phantom tach....just had my battery replaced yesterday....my pocket is still hurting....got to sell more....hehehehe....

ilove your sunroof man....that's my next project after tuning the ecu and engine....

by the way guys.....meet Tropang EG of honda club phils....

my team
my family
my club.....

Image

TROPANG EG


that's just the tip of the iceberg....
By Clarkypoo
#219478
slipstream622 wrote:
Clarkypoo wrote:How did you bolt down those safety harnesses?


to the seat bolts sir....had it crossed over before underneath but was not confident with it...also tried bolting it on the rear seatbelt bolts but wifey didn't like it...


I understand the back ones but did you bolt the front ones to the front seat bolts? I've always wanted 4 point harnesses but always thought you had to have a roll cage to make them safe.
By slipstream622
#219491 the front ones just met under the seat and i just used the supplied bolts for them....this is just for a bit added safety not for full racing mode....hehehehe...
User avatar
By Polanism
#219494 This car is hot! Post the slammed front with the Benen tow hooks :twisted:
By slipstream622
#219495 time will come my friend....project not yet done....thoose towhooks are benen copy....see you on the geb and i'll give you a special price for it.....hehehehe...
User avatar
By ron_kimi
#219499 Nice ride man!

Looking good! :thumb:

I like your radiator too! :wink:
By slipstream622
#219501 thanks ron....just sold the last piece last wednesday...if you told me earlier we could have talked about it...by the way the s drives were also sold...

i love django better....it's much faster and looks better....hehehehe...
By slipstream622
#220012 update....

my tanabe gmed.....sorry but will be pulling it out today as per my tuners advise....will be replacing it with my old hks dragger...

Image

Image

Image

my oem chin....had to cut it out a bit for thr towhooks to fit in...

Image

my projector headlights....switched it from oem to clear smoked to this...

Image

rear towhook....

Image

sorry just using a phone cam....
Image


next project...
phantom series tach by auto meter
rear brownglass with wipe which will fit in to my ferio 3rd brake light...
change cams to adjustable and change timing belt and tensioner
rechipping of ecu and tuning...

more to come....
User avatar
By berg89
#220017 Nice car man.
By slipstream622
#220022
berg89 wrote:Nice car man.


thanks sir....still al lot more work to do....
User avatar
By Simmons
#220229 Wow :o nice ride man :thumb: