- Tue Jan 24, 2012 10:48 pm
#291791
Hey guys, I haven't been on here for a while due to work/family commitments. Anyway I have some space to build another project on my drive way, so I went arse first and bought an engine conversion before a car but I waited and waited for one to pop up and I came up with this, not bad for £250 ($330)
after an early morning drive to leeds with a mate, we have finally got my new project back home and i am chuffed to bits and can't wait to rip it apart.
its a 95 ej2 coupe tin top with manual windows and 86068 miles, it came with the ironing board on the boot, a full stainless system and toyo sports stainless manifold, k&n filter, momo steering wheel and boss, lowered on coilover sleeves, sir front lip, a bit of rust on the rear arches and cd player
heres how it came to me:-
CHECK OUT THIS BATTERY STAY!
after finally digging the shipping container i use as a workshop in my backgarden and wired up the heater, i have set about working on the b16a conversion i bought a few weeks ago.
anyhow the lump came with a whole load of other parts including y21 lsd gearbox, shafts, del sol linkage, full wiring loom, p30 ecu, radiator, front and rear disk set up, front subframe with steering rack and arb, strut brace, front and rear del sol shocks with ebay coilover sleeves ::) and some other bits and bobs.
the rear disk set up included a set of d2 rear camber adjustment arms, the fronts have an unbranded set all for £450.
anyway some pics:-
Up to now I have removed the park bench off the bootlid, give it a good hoovering, I will be removing the seats and fitting my prelude ones in the morning and then start ripping the engine out. More to follow.
after an early morning drive to leeds with a mate, we have finally got my new project back home and i am chuffed to bits and can't wait to rip it apart.
its a 95 ej2 coupe tin top with manual windows and 86068 miles, it came with the ironing board on the boot, a full stainless system and toyo sports stainless manifold, k&n filter, momo steering wheel and boss, lowered on coilover sleeves, sir front lip, a bit of rust on the rear arches and cd player
heres how it came to me:-
CHECK OUT THIS BATTERY STAY!
after finally digging the shipping container i use as a workshop in my backgarden and wired up the heater, i have set about working on the b16a conversion i bought a few weeks ago.
anyhow the lump came with a whole load of other parts including y21 lsd gearbox, shafts, del sol linkage, full wiring loom, p30 ecu, radiator, front and rear disk set up, front subframe with steering rack and arb, strut brace, front and rear del sol shocks with ebay coilover sleeves ::) and some other bits and bobs.
the rear disk set up included a set of d2 rear camber adjustment arms, the fronts have an unbranded set all for £450.
anyway some pics:-
Up to now I have removed the park bench off the bootlid, give it a good hoovering, I will be removing the seats and fitting my prelude ones in the morning and then start ripping the engine out. More to follow.
Last edited by stubrun on Fri Mar 22, 2013 12:48 am, edited 8 times in total.