- Thu Feb 27, 2014 3:09 am
#343078
ok guys i am building a boosted gsr i would like some were between 350-450 for hp i am going to have forged pistons and rods stock sleeves... but my question is what Precision entry lvl turbo is best i dont what something that is going to take forever too spool but here are my options...
5831E MFS (58mm inducer) - 585HP
5431E MFS (54mm inducer) - 500HP
5454E MFS (54mm inducer) - 495HP
5976E MFS (59mm inducer) - 620HP
also i was going to get a good manifold i will thinking between the ram horn and the top mount bolt from black works racing i am going to have a 4000 budget on the turbo kit so i think i am going to get the top mount.. my goal is too have a fun street car and a decent car for the track.. also there will be other variables in time like cams 3 inch exhaust lmk what u guys think
5831E MFS (58mm inducer) - 585HP
5431E MFS (54mm inducer) - 500HP
5454E MFS (54mm inducer) - 495HP
5976E MFS (59mm inducer) - 620HP
also i was going to get a good manifold i will thinking between the ram horn and the top mount bolt from black works racing i am going to have a 4000 budget on the turbo kit so i think i am going to get the top mount.. my goal is too have a fun street car and a decent car for the track.. also there will be other variables in time like cams 3 inch exhaust lmk what u guys think