- Thu Dec 17, 2009 4:41 am
#162426
B18b1 freshly built about 2500 miles since rebuilt, its running a Hondata S300. The head has been ported and polished by Ken Bailes with Supertech valve springs. Skunk2 PRo series intake manifold ported to house a 70mm throttle body.. Adjustable cam gears, its a stock bottom end with a block guard installed so im going to turbo it and was looking at manifolds my goal for now till i rebuild with cp piston and eagle rods and crower stage 2 turbo cams in is to run low boost (6 to7lbs) my goal one day is to get 350hp out of this set up thats after the rebuild is this mani over kill for my hp goal
http://www.full-race.com/catalog/produc ... ts_id=1238
http://www.full-race.com/catalog/produc ... ts_id=1238
TREES
95 EJ1 : fwd project
E30 325is : rwd project
02 wrx 2.1L 18g/6spd : fun car
04 FXT broke AF
95 EJ1 : fwd project
E30 325is : rwd project
02 wrx 2.1L 18g/6spd : fun car
04 FXT broke AF