what cams should i use

Turbo and Supercharger discussion
 Reply

what cams should i use

By 95boostedex
- Wed Jan 07, 2009 2:09 pm #87343 i currently have itr cams and i have fully built turbo ready b16a motor and fully built head now im down to what cams to use any thoughts?

should i buy different or keep these itr ones..

im looking to be running about 12-15lb boost

hopefully be in the 350 to 400hp range
User avatar

By ej2rey
- Wed Jan 07, 2009 4:25 pm #87366 I would inquire on sum turbo cams. I wouldn't run itr cams on a turbo set up. They mainly for all motor applications.

Search the web you'll find a few brands the sale turbo cams.
There's one company that is my one and only favorite company, crower. I've used their cams for both my d and b turbo set ups.

By TurboHatch
- Fri Jan 09, 2009 9:52 pm #87899 due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.
User avatar

By ej2rey
- Fri Jan 09, 2009 9:56 pm #87900
TurboHatch wrote:due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.

WOW!

By MASTERBUILDER
- Sat Jan 10, 2009 6:00 am #87994 TurboHatch is correct. i would invest in dual valve springs with retainers
User avatar

By Josiah
- Sun Feb 08, 2009 6:19 am #94896
TurboHatch wrote:due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.


was this on a sleeved block?
 Reply
Return to Boost