- Fri Jun 26, 2009 7:52 am
#126050
cool man it looks good.
- Thu Sep 10, 2009 4:54 am
#142762
Love it. getting ready to do ex pockets in panels with tweed and do the headliner
- Mon Aug 16, 2010 7:16 pm
#209179
I did this it was very easy and turned out awsome
- Thu Mar 17, 2011 7:49 pm
#244529
cool write up just one question. how deep were the screws used to reassemble the trim?
- Fri Mar 18, 2011 9:28 am
#244637
cool thanks, i might re-trim the doors this weekend
94_jdm_ferio wrote:HAFIL0_EG wrote:cool write up just one question. how deep were the screws used to reassemble the trim?
when i did mine, i had to use small screws if u use to big it will go through it
but id say less then 1 inch
cool thanks, i might re-trim the doors this weekend
- Sat Mar 26, 2011 12:09 pm
#246343
just finished retrimming my doors today came out better than i expected this thread made it easy to do thanks for the info guys
here's a couple of shots showing before and after
before
after
here's a couple of shots showing before and after
before
after
- Tue Apr 05, 2011 2:04 pm
#248500
Great write up! iv got mine apart and going to get the fabric. The dremel is the way to go to get the plastiweld tabs. this diy helped alot. pics to follow!
- Sun May 22, 2011 1:39 am
#256245
I didn't use tweed, but ended up using vinyl. I'll get some better pics tomorrow.
- Tue Sep 06, 2011 2:33 am
#270523
Nice write up quick question. I'm going to re-wrap my door panels I have a sedan so how many yards should I get?
http://civic-eg.com/viewtopic.php?t=17296
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828
#3 CivicEG.com Ferio Squad
My for sale thread check it out!
http://www.civic-eg.com/viewtopic.php?t=25828
#3 CivicEG.com Ferio Squad
- Tue Sep 06, 2011 3:24 am
#270533
i got 2m x 1m and i have enough left over
- Fri May 30, 2014 12:45 pm
#345998
Hey Guys
I am re wrapping my door panels and I am stuck on how to remove those plastic rivets to get to the fabric. I've been checking it out and I think that heat has been applied to the rivets. any Ideas on removing them?
Thanks!@
I am re wrapping my door panels and I am stuck on how to remove those plastic rivets to get to the fabric. I've been checking it out and I think that heat has been applied to the rivets. any Ideas on removing them?
Thanks!@
All right everyone, line up alphabetically according to your height.
- Page 2 of 3
- 1
- ,
- 2
- ,
- 3