Civic-EG.com Forum 3.3.1

- Tue May 20, 2008 8:08 pm #56112 Hi mates. I wanna know this please, will the DC2 JDM steering wheel fit into the EG hatch with no modification?? Just plug n play? And how to put the horn button in the wheel functional? Because I'm waiting one of this from Japan, genuine JDM item That steering wheel:

- Tue May 20, 2008 8:12 pm #56113 1) remove old wheel
2) put on new wheel
3) enjoy

Remember when Civics were cool ? Yea me neither

- Tue May 20, 2008 8:22 pm #56115 hahahaha^^^^

- Tue May 20, 2008 8:54 pm #56118 your horn will require a metal strip to contact the positive brass on the back of the wheel and then wired to the horn wire on the SRS loom.

-LowTEC Derbo "the coupe" Build Thread
http://civic-eg.com/viewtopic.php?t=1589
272whp 214wtq

- Tue May 20, 2008 11:36 pm #56141 Thanks people!

- Tue May 20, 2008 11:58 pm #56142 Depends on what model Civic you have - i put a dc2 airbag steering wheel into a non-airbag eg, i used the wee srs connector plug thing that sits behind the wheel from the dc2 aswell and it all works perfectly

If you're putting a non-airbag dc2 wheel into a non-airbag eg it will go straight on without any modification

If its a non-airbag wheel into an eg with airbags you'll need the wee metal strip as Derek said

My 1st eg build up -> http://civic-eg.com/viewtopic.php?t=802

- Wed May 21, 2008 12:01 am #56143 My ride is an EG4 '92 and it don't have airbag. So it's just plug n play!

- Wed May 21, 2008 6:54 am #56168 oooow nice picture you have there

Putting on the steering wheel is a breeze

- Wed May 21, 2008 12:31 pm #56191

oooow nice picture you have there

Putting on the steering wheel is a breeze

Love this interiors!

- Tue May 27, 2008 11:02 pm #56786 what is this trickery you speak of that will allow my new vti horn to work?

- Wed May 28, 2008 12:15 am #56794 Is the wheel an airbag wheel? Did you car have an airbag beforehand?

My 1st eg build up -> http://civic-eg.com/viewtopic.php?t=802

- Thu May 29, 2008 3:48 pm #56953 its a non airbag wheel and my old one was

- Thu May 29, 2008 5:31 pm #56979 If you take your steering wheel off you'll have a black SRS thing thats held in place with 3 screws - you dont need that bit anymore so take it off and in place of that you need the wee metal piece. The plug on the indicator stalks for the horn is at the bottom, its just a spade connector. The wee metal piece joins that to the contact ring on your non-srs steering wheel. You can get the bit from either a junkyard out a car that has no airbags or Honda sell it too, its not expensive at all!!

My 1st eg build up -> http://civic-eg.com/viewtopic.php?t=802

- Fri May 30, 2008 2:10 pm #57082 kick-ass

- Wed Oct 15, 2008 8:45 pm #74451 that interior is fucking awesome... i wish i could find that shit for a cheap price.