- Tue Feb 22, 2011 4:28 pm
#240262
awryt guys , got my self a eg coupe just looking to see if theres any out there cheap enough max price if £600 cheers !
- Mon Mar 07, 2011 4:45 pm
#242731
for that price you not going to get everything you need unless your lucky enough to find a spare/repairs or written off donor car, check local scrap yards
- Wed Mar 09, 2011 8:08 am
#243102
x2
Even if you can accumalate everything you need for the swap for only 600 Pounds, It will not be in good working order. I.E. an Engine thats ready to blow, or a Transmission with bad gears/synchros.
2017 Chevy BoltEV DD |2001 Honda CRV SE
chrisscott wrote:for that price you not going to get everything you need unless your lucky enough to find a spare/repairs or written off donor car, check local scrap yards
x2
Even if you can accumalate everything you need for the swap for only 600 Pounds, It will not be in good working order. I.E. an Engine thats ready to blow, or a Transmission with bad gears/synchros.
2017 Chevy BoltEV DD |2001 Honda CRV SE
- Wed Mar 09, 2011 7:18 pm
#243181
I'd have a look on civiclife mate,
http://www.civiclife.net/board/topic/95 ... 21-gearox/
tem for sale:b16a2 engine and y21 gearbox
Price:£420
Location:bradford west yorkshire
Condition:good used
Description:b16a2 engine and y21 gearbox out of my eg6 civic with around 107k no smoke no knocks no bangs doesnt burn oil gearbox is fine only crunches is in 3rd in high revs. comes with inlet manifold and throttle body fuel rail injectors. no dizzy no leads with clutch and fly wheel
http://www.civiclife.net/board/topic/95 ... 21-gearox/
tem for sale:b16a2 engine and y21 gearbox
Price:£420
Location:bradford west yorkshire
Condition:good used
Description:b16a2 engine and y21 gearbox out of my eg6 civic with around 107k no smoke no knocks no bangs doesnt burn oil gearbox is fine only crunches is in 3rd in high revs. comes with inlet manifold and throttle body fuel rail injectors. no dizzy no leads with clutch and fly wheel
- Thu Mar 10, 2011 12:13 pm
#243286
That's a pretty good price for what you get, I do have a spare B16a2 going it was full rebuilt and had a turbo on it when I got it now has sat still for a while so would be happy to sell.
You'll still need ECU loom, exhaust manifold and drive shafts
You'll still need ECU loom, exhaust manifold and drive shafts