General engine questions/issues that aren't specific to the other categories
User avatar
By Civic Savior
#345575 Here's one for you. 94 CX hatch D15B7 184xxx.

New: Rad hoses, thermostat, coolant temp sensor, fan switch and heater core hoses.

Recently had a cooling system flush.

Before all of this my upper rad hose was swelling to the point of being double its normal size. That is what prompted all this work. Now after all is said and done the hose doesn't swell anymore, but my fan doesn't come on. The temp gauge stays just below half and I don't lose coolant anymore, but it still drives me crazy that it doesn't come on. I have jumped the connection and the fan spools up so I know the fan is ok.....im stumped...