Civic-EG.com Forum 3.3.1

- Fri Oct 05, 2012 6:03 pm #317321 Has anyone attempted to do this I just I just bought EIBach sway bars 27mm front and 17mm rear and hardrace bushing kit with hard racing l C A and blackworks fully adjustable coilovers its my first suspension setup that I'm doing let me know if I'm missing anything else that i would need and any suggestions on how to do it . Thanks!!

- Sat Oct 06, 2012 5:59 am #317365 ball joints, tie rod ends, steering rack bushings, and a hydraulic press (unless you want to pay a shop to do it)

- Sat Oct 06, 2012 1:58 pm #317377 Thanks men I look for what you told me and the company hard race makes those parts for my car as well so I'm gonna go ahead and order them. I found a 20 ton hydraulic press for about $150. As soon as all the parts come in i will start working on it.

- Sun Oct 07, 2012 3:59 am #317415 Be careful with the press plates (cast iron plates) that come with that press. I haven't broken mine, but I've heard stories about them exploding. Eye protection!

Also, since you'll have the spindle out and a press handy, do your wheel bearings, and inspect your cv joints.