Civic EG View topic - FS: 95 Civic Coupe Ohio

9 posts
Page 1 of 1

9 posts

Reply

FS: 95 Civic Coupe Ohio #281619

By BoostedD16 - Wed Nov 16, 2011 4:52 am

User mini profile
View full profile

BoostedD16

Rank: Poster
Posts: 68
Joined: Fri Jan 29, 2010 5:48 pm
Location: Parma

Status: Off-line

- Wed Nov 16, 2011 4:52 am #281619 The rundown:

95 Civic DX 2 door coupe. Asking $6900 obo.

D16Z6 with SI trans built by whoopeedoo racing. Carbon synchros w/ LSD
Eagle rods
Wiseco 8.8 pistons
OEM crank, bearings, waterpump, oil pump(ported), tensioner, t-belt. All new
Bisimoto level 3.6 cam
KMS valvetrain .5mm oversized valves, race springs and titanium retainers
AEM adjustable cam gear
Precision 680cc injectors
Skunk2 intake mani
Omnipower 4 bar map sensor
2.5 inch intercooler piping
33x12x3 intercooler
Garrett 60-1 .48 a/r
RC autoworks mini ram manifold
Tial bov
Turbonetics wastegate
AEM wideband and tru boost
Autometer oil pressure gauge
Full 3 inch exhaust, stainless dp the rest is aluminum, vibrant muffler
Wilwood big brake kit in front. 11inch rotors 4 piston calipers stainless lines
Integra rear disc swap
Blox adjustable UCA's
Blue LCA's in rear
Full Race traction bar
Rota slipstreams 15inch with good falken tires
8pt rollcage

Tuned on eCtune.

Pictures are from when it had a Y8 bottom end but it is no a complete Z6 motor.

#281649

By poorman type-r - Wed Nov 16, 2011 3:26 pm

User mini profile
View full profile

poorman type-r

Rank: EG Groupie
Posts: 743
Joined: Tue Jul 06, 2010 8:44 am
Location: Paso Robles, CA

Status: Off-line

- Wed Nov 16, 2011 3:26 pm #281649 What numbers did it put down on the dyno?

"If you want your car to be cheap and fast it wont be reliable... If you want your car to be reliable and cheap it wont be fast... If you want your car to be fast and reliable it wont be cheap"

#281650

By BoostedD16 - Wed Nov 16, 2011 3:41 pm

User mini profile
View full profile

BoostedD16

Rank: Poster
Posts: 68
Joined: Fri Jan 29, 2010 5:48 pm
Location: Parma

Status: Off-line

- Wed Nov 16, 2011 3:41 pm #281650 Around 280whp on a mustang dyno. On 17psi. Has a really stiff spring in wastegate and thats just what it is making off of the wastegate. Has room for more boost as it is I just wanted to keep it low and drive it. But I have my eyes on something else.

#281659

By d-mon - Wed Nov 16, 2011 5:38 pm

User mini profile
View full profile

d-mon

Rank: Jr. Member
Posts: 969
Joined: Thu Apr 17, 2008 4:39 pm
Location: under the hood

Status: Off-line

- Wed Nov 16, 2011 5:38 pm #281659 nice build.
i'm sure you could get close to 400whp on pump gas with that setup.

street machines > dyno queens
z6 turbo power FTW tuned on crome

#281668

By 1ACarlos - Wed Nov 16, 2011 7:21 pm

User mini profile
View full profile

1ACarlos

Rank: Sponsor
Posts: 1279
Joined: Tue Oct 26, 2010 3:18 pm
Location: mass

Status: Off-line

- Wed Nov 16, 2011 7:21 pm #281668 Nice coupe

Carlos
1AAUTO.com
888-844-3393
FREE SHIPPING IN THE LOWER 48 STATES

#282215

By BoostedD16 - Sun Nov 20, 2011 11:43 pm

User mini profile
View full profile

BoostedD16

Rank: Poster
Posts: 68
Joined: Fri Jan 29, 2010 5:48 pm
Location: Parma

Status: Off-line

- Sun Nov 20, 2011 11:43 pm #282215 Black Friday Sale this week only! $6200 takes it! What a deal!

#282252

By Apexracing - Mon Nov 21, 2011 5:51 am

User mini profile
View full profile

Apexracing

Rank: powered by K series
Posts: 2448
Joined: Sun Feb 03, 2008 1:06 am
Location: camillus, NY USA

Status: Off-line

- Mon Nov 21, 2011 5:51 am #282252 what a deal indeed which i had the cash :thumb:

#282815

By BoostedD16 - Thu Nov 24, 2011 3:49 am

User mini profile
View full profile

BoostedD16

Rank: Poster
Posts: 68
Joined: Fri Jan 29, 2010 5:48 pm
Location: Parma

Status: Off-line

- Thu Nov 24, 2011 3:49 am #282815 The damage from the deer. It isn't terrible and fixed as best as could. Corner light cracked, so is windshield, and fender dented but pounded out. I have more paint I believe if you wanted to get a new fender and have it painted.