Civic-EG.com Forum 3.3.1

- Mon Nov 05, 2007 8:25 pm #28602 Hi, Does any one know how to replace the high mount brake light bulb on a 94 Hatchback? Regards, Gerald.

- Mon Nov 05, 2007 10:13 pm #28611 if your talking about the one in the spoiler you just take the screws out of the brake light, then you can replace the bulb

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Tue Nov 06, 2007 3:45 am #28662 Hi, Yes, I have gotten as far as removing the screws, but I can't see how to get the light assembly out. Gerald.

- Tue Nov 06, 2007 5:37 pm #28740 it just pops out, take the wing off if it makes it easier for you.

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Tue Nov 06, 2007 7:07 pm #28743 haha i just changed my stock wing for a duck bill wing with out the light lol

TEAM OUTKAST since AUG 2007

NORCALTUNERS.COM
CIVIC-EG.COM

- Tue Nov 06, 2007 8:01 pm #28751 its a lot easier if you just take the wing off..

- Wed Nov 07, 2007 2:24 am #28812 heres my easy 4 step process man thank me later!


step 1: take off wing (4- 10 mm bolts)
step 2: install CARBON FIBER Duck Bill
step 3: Tighten those 4-10 mm nuts
Step 4 enjoy!

Last edited by asianrob on Wed Nov 07, 2007 4:51 am, edited 1 time in total.

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed Nov 07, 2007 3:07 am #28824

heres my easy 4 step process man thank me later!


step 1: take off wing (2- 10 mm bolts)
step 2: install CARBON FIBER Duck Bill
step 3: Tighten those 2-10 mm nuts
Step 4 enjoy!

Its actually 4....two on each hinge for the window.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Wed Nov 07, 2007 4:52 am #28831 EDITED! lol i forgot! hahah not use to owning a hatch anymore hahahah the teg is getting to me

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed Nov 07, 2007 3:20 pm #28848

heres my easy 4 step process man thank me later!


step 1: take off wing (4- 10 mm bolts)
step 2: install CARBON FIBER Duck Bill
step 3: Tighten those 4-10 mm nuts
Step 4 enjoy!

very nice

- Thu Nov 08, 2007 2:42 am #28966 Success! The problem was the gasket between the lens and housing. It was catching in the opening. I trimmed it, and now all is well. Thanks, Gerald.