- Sat Jul 10, 2010 10:52 pm
#204054
Quick, 5 min removal.
Fold back down.
Remove plastic retainer clip on the outer pivot dowel located on the outside edges. for me, its easiest with a smal set of pliers.
Once those are removed, push the seat back AWAY from the center and pop it out of the pivot pin. swing away SLIGHTLY, and then pull it away from the outside pivot pin. repeat for other side.
There is 1 10MM bolt holding the bottom pad down. it is in the center and slightly to the right. Take that off and then.. this is the tricky part.
pull the bottom pad toward the front of the car, at about 45 degrees, pull up then back. it should come right out.
