Civic-EG.com Forum 3.3.1

- Thu Mar 17, 2011 7:55 pm #244531 hey guys so i found a rear disk break swap at the local junk yard for 100, its from a 93 coupe. i was just wondering what i would need to swap? just to make sure i get everything from the junk yard thanks guys

[Ajax1989]

- Thu Mar 17, 2011 9:12 pm #244545 id swap it all

the trailing arms, lca,s sway bar if it has it
and ur need the ebrake cables

i pulled my rear disc off a 91 integra

- Fri Mar 18, 2011 5:05 am #244616 okie dokie thanx ferio

i might go pick it up tomorrow, but i work so idk if the guy at the junk yard will wait for me

- Fri Mar 18, 2011 1:39 pm #244660 yes by 91 fits.I thought the lcas were diiferent and the calipers were?

[Ajax1989]

- Fri Mar 18, 2011 3:59 pm #244687

yes by 91 fits.I thought the lcas were diiferent and the calipers were?

i used EVERYTHING off the 91 teg but my shocks
everything bolted right into place no problems
lca's tariling arms, sway bar(had to find eg mounts tho)

- Wed Mar 30, 2011 2:05 am #247041 So rear brakes off a 90 teg should work then for my 95 cx right?

[Ajax1989]

- Wed Mar 30, 2011 2:35 am #247045

So rear brakes off a 90 teg should work then for my 95 cx right?

it should
i dont know much about the DA's and if there is a diff between the 90 and 91's

but if there the same then yes it will all fit
like mention you need the ebrake cables oh and the 40/40 prop valve

- Wed Mar 30, 2011 2:43 am #247047 Sounds good thanks.

- Wed Mar 30, 2011 9:51 am #247088 just curious about what honda's that came out with 40/40 prop valve, and will ek rear disc set up fit onto eg?

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

- Wed Mar 30, 2011 2:05 pm #247111 ^ yes but the lcas are way to long for our egs. And you dont need a 40/40 prop valve. My 93 si came stock with a prop valve like the dx/vx/cx. This mod is what deturs people from doing the 4 sic swap. The prop valve IS NOT NEEDED!

93 si hatch(came from factory with 4 disc)

- Wed Mar 30, 2011 2:09 pm #247112

^ yes but the lcas are way to long for our egs. And you dont need a 40/40 prop valve. My 93 si came stock with a prop valve like the dx/vx/cx. This mod is what deturs people from doing the 4 sic swap. The prop valve IS NOT NEEDED!

93 si hatch(came from factory with 4 disc)

so EK trailing arms are ok for swap then?

another thing, handbrake lines..... are they all the same length?

Support Japan buy JDM

http://civic-eg.com/viewtopic.php?t=19373

- Wed Mar 30, 2011 2:11 pm #247113 if you have an eg you have to use your eg trailing arms or integra ones. The ek trailing arms are way longer!

And i may be wrong on the 40/40.. Although my prop valve is identical on my dx coupe and si maybe they are different. But they look absolutleyIDENTICAL

- Wed Mar 30, 2011 2:26 pm #247117

^ yes but the lcas are way to long for our egs. And you dont need a 40/40 prop valve. My 93 si came stock with a prop valve like the dx/vx/cx. This mod is what deturs people from doing the 4 sic swap. The prop valve IS NOT NEEDED!

93 si hatch(came from factory with 4 disc)

False info. The prop valve on eg si's are for the smaller si brakes. Sorry!

[Ajax1989]

- Wed Mar 30, 2011 9:34 pm #247174

^ yes but the lcas are way to long for our egs. And you dont need a 40/40 prop valve. My 93 si came stock with a prop valve like the dx/vx/cx. This mod is what deturs people from doing the 4 sic swap. The prop valve IS NOT NEEDED!

93 si hatch(came from factory with 4 disc)

False info. The prop valve on eg si's are for the smaller si brakes. Sorry!

any civic or intgra that came with rear disc minus the abs(iirc)
has a 40/40 valve and YES you do need it

if not ur rear disc is pointless
my 40/40 looks identical to my stock

and yes you need the ebrake/handbrake cables
and i believe the trailing arms are the same but the lcas are diff

- Thu Mar 31, 2011 3:27 am #247237 before you swap it in its probably a good idea to change the trailing arm bushings while its out and easier to do.

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little