Civic-EG.com Forum 3.3.1

- Tue Feb 24, 2009 6:02 pm #98656 I have a civic cx and it does'nt come with any sway bar at all, just wondering would integra dc sway bars bolt right up? would i have to change my lower control arms? looking to put sways in the front and back



Thanks!

- Tue Feb 24, 2009 7:30 pm #98671 You'll need LCAs both front and back off a car that came equipped with ARBs out the factory. After that yes, DC bars bolt in nicely

[suspendedHatch]

- Wed Feb 25, 2009 5:03 pm #98931 GSR front is 24mm but the back is only 13mm. So get the GSR front and an aftermarket rear swaybar. I recommend Progress either their 22mm or the 24mm adjustable.

Also get the Integra front lower tie bar while you're under there.

I think there is a 26mm Si front swaybar. Can't remember if it's the 96+ or not. But that's probably TOO stiff for the front. Stiffening the front increases understeer.