Rear swaybar

Springs, Struts, Swaybars, Bushings, Tower Braces & more
 Reply
User avatar

Rear swaybar

By rodney120985
- Sun Mar 04, 2012 7:38 am #296955 Ok I have ran into a slight problem here I was reading on the DIY post about the rear swaybar that teal did I know he got one that did not have a factory rear bar. The question I have is my car didn't come with one from the factory but I have after market lca's and I am looking at getting the same swaybar as teal so I need one with a no rear factory or could I get one for a car with a factory rear bar? And yes mine has a factory front just no rear

:? :? :? :?

By EJ1_MK
- Sun Mar 04, 2012 7:57 am #296956 what size is "teals" or what does "teal" have. it all really depends on the size of the bar as what you will need
User avatar

By TrailerTrash
- Sun Mar 04, 2012 4:09 pm #296966 if i remeber right, that bar he put on bolts to the LCA at the same place the strut does. aftermarket or stock LCAs the strut still bolts at the same place. you should have no problems at all if you want the same one he has.
User avatar

By rodney120985
- Sun Mar 04, 2012 10:17 pm #296994 Yea trailer you are correct. I guess the question I was really asking was if I got a rear bar that was for a car with a original bar would it work since I have aftermarket lca's with holes for swaybars? Thanks for the help

By EJ1_MK
- Sun Mar 04, 2012 10:43 pm #296996 Yes it will as long as you get the correct end links and you don't go above 15mm with out a brace you will be fine. All the sub frames have the holes to add a swaybar. So as long as you get a bar from another civic or integra you will have no problem.
 Reply
Return to EG Chassis Suspension