ECU, Wiring, Sensors
User avatar
By OmarG
#62567 It never was a problem until I removed my SRS fuse (I replaced it). Now my SRS light is on constantly, and my driver's side blinker (whenever I put my turn signal on for a left turn) starts to blink super fast, and the little tick tock tick tock noise is sped up too.

My right side works fine, like normal, and they both work fine when the hazzard lights are activated. Anyone have any ideas?

and how do I get that damned srs light off?

:lol:
User avatar
By Faded_Milano
#62584 my SRS light has been on since I've had mine :x
User avatar
By ee8
#62585 when you do srs work you need to take battery of before doing anything. if not, light will stay on.

my buddys s2k had the same and it needed to be reset with the pgm honda tool.
User avatar
By OmarG
#62732 so, any thoughts on the annoying turn signal?


:P
User avatar
By Gorveatt
#62733 you sure you don't have a bulb out? did you replace them with LED's?
User avatar
By OmarG
#62742 the only bulb I have out is the right head light, I disconnected it. Nope, no LEDs though.
User avatar
By OmarG
#63536 :UPDATE:

I reconnected ALL of my lights today to see if i could troubleshoot further. With my lights on my FRONT driver's side lights are shining VERY faintly. like a cheap flashlight. The passanger's side is fine though. When I apply the left turn signal, both of the lights (headlight and turn signal) flicker rapidly, but they're still dim. The rear driver's side is as bright as usual, but it still blinks way too fast.

I'm thinking they aren't getting enough power. :?

:EDIT: They blink at the normal speed when the hazard lights are activated, but the front driver's side is still way too dim.
User avatar
By Greasedmonkey
#63558 Time to go through all the wiring.