Civic-EG.com Forum 3.3.1

- Thu Oct 13, 2011 2:08 am #277507 So my e-brake light stays on and it was so random . I changed my driver side wheel cylinder and replaced the third brake light and bled the brake and then light stayed on I checked the switch that's under the e-brake handle ns it's not stuck or anything so I donno what it could be any help would be good thanks

- Thu Oct 13, 2011 3:14 am #277524 the brake fluid is low

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Thu Oct 13, 2011 3:19 am #277526

the brake fluid is low

x2

- Thu Oct 13, 2011 3:40 am #277532 If your brake fluid level and your pads are good then check the float sensor inside the master cylinder reservoir , there are two wires that are connected to the cap. Make sure they are plugged in and the float isnt stuck.

Coupe Crew #16
DC2: http://www.civic-eg.com/viewtopic.php?t=21051

- Thu Oct 13, 2011 4:54 am #277554 its funny how the smallest thing fly by ones head and then you feel stupid for not looking but thanks guy !

- Sat Apr 13, 2013 1:27 pm #330551 This happened to me this morning and I fixed it thanks to this post, checked , fluid was high, bobber just got stuck. Thanks guys

D15 '95 EG6
eBay and junkyard parts ftw!
2009 Honda ruckus (with mods) for sale!!