Im doing wire tuck need advise....

ECU, Wiring, Sensors
 Reply
User avatar

By egsedanguy
- Wed Mar 17, 2010 7:00 pm #181904 haha. dude im tuckin it all the way.just like teal. i just pulled the fenders off and bumper to make it all easer to run. just not sure were to run the headlight wires. :? waiting on my boy to come over and get some energy drings and start some more. pics asap. :thumb:
User avatar

By turtlespeed37
- Thu Mar 18, 2010 5:15 am #182003 i ran mine through the inner fenders it worked out great i can post some pics tomorrow for ya if you want
User avatar

By 99cx
- Thu Mar 18, 2010 5:28 pm #182106 finished yet?
hah lets see those pics
before and after!

Before:
Image

After:
Image
User avatar

By egsedanguy
- Fri Mar 19, 2010 8:34 pm #182356 nice mine looks jsut like that. haha. im still workin on it. not the fastes with wires. haha plus this cali sun is hot right now. i dont have a nice garage to work in. on the concret outside. haha almost done. i say 3 hours it will be back together. :thumb:
User avatar

By hatchie
- Sat Mar 20, 2010 1:32 am #182415 quick ? did u guys pull the dash to do this or no? jw :?
User avatar

By 99cx
- Sat Mar 20, 2010 1:35 am #182416 yeah i pulled out mine and redid all those harnesess. dosent take much to do so. also makes the job easier.
User avatar

By hatchie
- Sat Mar 20, 2010 1:55 am #182417 ok cuz i use mine daily so idk lol i wanna tuck but im obv not gunna be able to drive around with no dash!
User avatar

By 99cx
- Sat Mar 20, 2010 2:03 am #182418 haha i did it! only thing i left was the cluster plugged in and the 4-way switch to signal. hahaha it pretty damn funny going through the drive thru with a steering wheel and your cluster just chilling ontop of it!

i only had it out for a day. weekend is a good time to do it. the rest is all under the hood.
User avatar

By hatchie
- Sat Mar 20, 2010 2:25 am #182420 yeah see i never did anything like this before so id be lost for prlly 2 days minimum lol and then id start to gether things lol
User avatar

By 99cx
- Sat Mar 20, 2010 2:27 am #182421 haha yeah. dash its like 6 bolts and a few conections and its out.
but just read the write ups and if you need and help just ask. :D
User avatar

By hatchie
- Sat Mar 20, 2010 2:36 am #182422 see the only thing is that i read teals write up but still stuck on the drivers side headlight harness .... he said that id have to pull that whole harness throught the firewall and run the headlight and washer harness through the fenders but i would have to extend the wires that are attached to the starter clips (aka plastic clips that sit on strut mount, in front of clutch reserv.) it only me doing this so i mean id see doing this if i had a coupl ppl to help me get it done so i dont eff up lol
User avatar

By 99cx
- Sat Mar 20, 2010 3:03 am #182430 hmmm. not too sure. i only extended my cruise control unit and wiper motor wires. the rest i had plenty of extra wire.
just pull off the old tape.
User avatar

By hatchie
- Sat Mar 20, 2010 3:06 am #182431 did you keep the heater? if so where did you run the wires out to the motor?
 Reply
Return to Chassis - Electrical