2 hid kits

ECU, Wiring, Sensors
 Reply
User avatar

2 hid kits

By blk92hb
- Wed Apr 28, 2010 2:02 am #190525 Can i run 2 hid kits one for the headlights and one for the foglights with a stock rated battery
User avatar

By Gorveatt
- Mon May 03, 2010 8:12 pm #191656 if i had internet i would have seen this earlier, but yes you can use the stock battery, I would recommend using a relay harness for the ballasts though
User avatar

By blk92hb
- Tue May 04, 2010 10:31 pm #191854 Do i have to retro fit the headlights or is that just an option and where do i need to put the relay at in the wiring.
User avatar

By Gorveatt
- Tue May 04, 2010 10:36 pm #191856 well retrofitting isn't necessarily required for using HID's, It's more so if you want proper lighting with an HID Setup, that you would retrofit HID projectors, as for the relay harness, i would say F it, save some time, and go to DDMtuning.com and buy one.
User avatar

By OleFolk
- Fri May 14, 2010 4:23 am #194136 this might sound :weee: but can I use hid kits for my taillights?
User avatar

By blk92hb
- Sat May 15, 2010 1:29 am #194341 why would you??? :? it would be point less. use led's http://www.superbrightleds.com/

use these they also make the led's for the dash lights
User avatar

By OleFolk
- Sat May 15, 2010 4:44 am #194369 cause it would jus be straight belligerent.
And a pain for anyone behind you.
its probably super illegal somehow.

il stick with the leds thanks
User avatar

By Ajax1989
- Sat May 15, 2010 6:35 am #194390 good to know that i can run 2 kits, i want to get yellow hids for my foglights!
User avatar

By blk92hb
- Sat May 15, 2010 5:53 pm #194455 thats what i was thinking yellow for the fogs and white for the headlights.



for hid's in the tail light. i would think that would be illegal but it will let ppl know when you are stopped
 Reply
Return to Chassis - Electrical