- Tue Nov 07, 2006 5:33 pm
#463
I read this on Honda-tech, BlueIntegraBoy is the original author. Great write-up!
JDM Integra Type-R clusters will work with these diagrams. Make sure you know which spec cluster you have. 96 Spec will have a catalytic converter icon near the CEL and the 98 Spec do not. Use the 94-97 Integra diagram for 96 Spec and 98-01 Integra diagram for 98 Spec.
To tell the difference between a 94-97 and 98-01 clusters is that the 94-97 clusters have grey gauge faces while the 98-01 clusters have black gauge faces. Also, 94-97 clusters have the seatbelt, door ajar, and SRS lights in the upper right light grouping, whle the 98-01 clusters have door ajar, ABS, and SRS in the upper right light grouping.
pic:
94-97 Integra cluster into a 92-95 Civic:
98-01 Integra cluster into a 92-95 Civic:
and a 96-00 Civic cluster into 92-95 Civic:
[img]96-00%20Civic%20cluster%20into%20a%2092-95%20Civic[/img]
Civic (92-95) Plug - 12 pin (A designation)
Civic (92-95) Plug - 10 pin (B designation)
Rewiring SRS Plug (works for 92-00 Civics)
Below is a picture of a Civic SRS plug. Notice that when the clip part is facing down, the yellow wire is of the left if the plug is facing away from you. The blue wire is one the right if the plug is facing away from you. You can use your Civic SRS plug with the Integra cluster. All you need to do is cut the yellow and blue wires and switch them (connect yellow to blue, and blue to yellow). So if this was an Integrs SRS plug, the yellow wire would be on the right, while the blue wire will be on the left; the plug again facing away from you and the clip part on the bottom.
If you do have an Integra SRS plug, you cut off the Civic SRS plug and color match the wires from the Civic harness. This note is at the bottom of the 96-00 Civic diagrams.
to those with cruise control (LX/EX/Si)
To get the cruise control light to work, all you need to do is cut off the cruise control wire (red/blue) from the green plug and reconnect it with a wire that won't be used on the Integra cluster. For EKs, you can depin the pink wire (washer fluid), cut the wire leaving the metal pin and some wire left, reconnect it with the cruise control wire, and repin into the cruise control slot on the Integra plug. Your cruise control light will now light up when engaged.
Integra/Civic (96-00) Plug - 16 pin (A & C designation)
Integra/Civic (96-00) Plug - 13 pin (B & D designation)
Once again, all credit is given to BlueIntegraBoy, great write-up!
JDM Integra Type-R clusters will work with these diagrams. Make sure you know which spec cluster you have. 96 Spec will have a catalytic converter icon near the CEL and the 98 Spec do not. Use the 94-97 Integra diagram for 96 Spec and 98-01 Integra diagram for 98 Spec.
To tell the difference between a 94-97 and 98-01 clusters is that the 94-97 clusters have grey gauge faces while the 98-01 clusters have black gauge faces. Also, 94-97 clusters have the seatbelt, door ajar, and SRS lights in the upper right light grouping, whle the 98-01 clusters have door ajar, ABS, and SRS in the upper right light grouping.
pic:
94-97 Integra cluster into a 92-95 Civic:
98-01 Integra cluster into a 92-95 Civic:
and a 96-00 Civic cluster into 92-95 Civic:
[img]96-00%20Civic%20cluster%20into%20a%2092-95%20Civic[/img]
Civic (92-95) Plug - 12 pin (A designation)
Civic (92-95) Plug - 10 pin (B designation)
Rewiring SRS Plug (works for 92-00 Civics)
Below is a picture of a Civic SRS plug. Notice that when the clip part is facing down, the yellow wire is of the left if the plug is facing away from you. The blue wire is one the right if the plug is facing away from you. You can use your Civic SRS plug with the Integra cluster. All you need to do is cut the yellow and blue wires and switch them (connect yellow to blue, and blue to yellow). So if this was an Integrs SRS plug, the yellow wire would be on the right, while the blue wire will be on the left; the plug again facing away from you and the clip part on the bottom.
If you do have an Integra SRS plug, you cut off the Civic SRS plug and color match the wires from the Civic harness. This note is at the bottom of the 96-00 Civic diagrams.
to those with cruise control (LX/EX/Si)
To get the cruise control light to work, all you need to do is cut off the cruise control wire (red/blue) from the green plug and reconnect it with a wire that won't be used on the Integra cluster. For EKs, you can depin the pink wire (washer fluid), cut the wire leaving the metal pin and some wire left, reconnect it with the cruise control wire, and repin into the cruise control slot on the Integra plug. Your cruise control light will now light up when engaged.
Integra/Civic (96-00) Plug - 16 pin (A & C designation)
Integra/Civic (96-00) Plug - 13 pin (B & D designation)
Once again, all credit is given to BlueIntegraBoy, great write-up!